TP316 Stainless Steel Mechanical Tube
| Min. Order: | 500 Kilogram |
|---|---|
| Trade Term: | FOB,CFR,CIF,EXW |
| Payment Terms: | L/C, D/P, T/T |
| Supply Ability: | 2000Ton/Month |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Lishui, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company |
Product Detail
| Model No.: | 730640 |
|---|---|
| Means of Transport: | Ocean, Land |
| Brand: | Ganyeah |
| Grade: | SUS 304/304L/ 316L/347H/S32205/S32750 |
| Standard: | Astm a312/Astm a778/Astm a554/Astm a249/JIS G3463 |
| Inspection: | UT, ET, HT, RT |
| Section Shape: | Round |
| Certification: | API 5LC,DNV•GL, ABS, TUV, LR. |
| Length: | 6 m or as customers' request |
| Surface: | Pickling,annealing,polishing,bright |
| HS Code: | 730640000/730611000 |
| Origin: | China |
| Production Capacity: | 2000Ton/Month |
| Packing: | Plastic, Wooden Case, Others Seaworthy Packing |
| Delivery Date: | 15days |
Product Description
TP316 Stainless Steel Mechanical Tube Diameter, Wall.
NOTE 1 – Ovality is the difference between maximum and minimum outside diameters measured at any one cross section. There is no addifional tolerance for ovality on TP316 Stainless Steel Mechanical Tube having a nominal wall thickness of more than 3% of the outside diameter.
NOTE 2 – An ovality allowance of twice the outside diameter tolerance, shown in this table, is applied one half plus and one haif minus to the outside diameter, for tubes having a nominal wall thickness of 3% or less of the outside diameter. The average of the maximum and minimum outside diameter readings should fall within the outside diameter tolerances of this table.
NOTE 3 – TP316 Stainless Steel Mechanical Tube may be specified to only two of the three following dimensions-outside diameter, inside diameter, or wall.
| OD Size, in.(mm) | OD, ± | ID, ± | ||
| in. | mm | in. | mm | |
| Up to 3/32 (2.4), excl | 0.001 | 0.03 | 0.001 | 0.03 |
| 3/32 to 3/16(2.4 to 4.8), excl | 0.0015 | 0.038 | 0.0015 | 0.038 |
| 3/16 to 1/2 (4.8 to 12.7), excl | 0.003 | 0.08 | 0.005 | 0.13 |
| 1/2 to 1 (12.7 to 25.4), excl | 0.004 | 0.10 | 0.006 | 0.15 |
| 1 to 1 1/2 (25.4 to 38.1), excl | 0.005 | 0.13 | 0.007 | 0.18 |
| 1 1/2 to 2 (38.1 to 50.8), excl | 0.006 | 0.15 | 0.008 | 0.20 |
| 2 to 2 1/2 (50.8 to 63.5), excl | 0.007 | 0.18 | 0.010 | 0.25 |
| 2 1/2 to 3 1/2 (63.5 to 88.9), excl | 0.010 | 0.25 | 0.014 | 0.36 |
| 3 1/2 to 5 (88.9 to 127.0), incl | 0.015 | 0.38 | 0.020 | 0.51 |
| Over 5 to 6 (127.0 to 406.4), incl | 0.00125 in./in. or mm/mm of circumference | 0.0013 in./in. or mm/mm of circumference | ||
Length Variations – Cut Length Tubes
| Length, ft (m) | Outside Diameter, in.(mm) | Permissible Variations in Length, in. | ||
| OverA | Under | |||
| in. | mm | |||
| 4 (1.2) and under | up to 2(50.8), incl | 1/16 | 1.6 | 0 |
| over 2 to 4(50.8 to 101.6), incl | 3/32 | 2.4 | 0 | |
| over 4(101.6) | 1/8 | 3.2 | 0 | |
| Over4 to 10 (1.2 to 3.0), incl | up to 2(50.8), incl | 3/32 | 2.4 | 0 |
| over 2(50.8) | 1/8 | 3.2 | 0 | |
| Over 10 to 24 (3.0 to 7.3), incl | all sizes | 3/15 | 4.8 | 0 |
Tensile Requirements (Round Annealed Condition)
| Grade | Tensile Strength, min | Yield Strength, min | Elongationa IN 2 IN. OR 50MM, MIN, % | ||
| ksi | MPa | ksi | MPa | ||
| MT 429 and MT 430 | 60 | 414 | 35 | 241 | 20 |
| MT-430-Ti | 60 | 414 | 30 | 207 | 20 |
| MT 304 L & 8 MT 316 L | 70 | 483 | 25 | 172 | 35 |
| All other austenitic steels | 75 | 517 | 30 | 207 | 35 |
