PP Yarn String Wound Filter Cartridge 58 mm Water Filteration Treatment Parts
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | SC-10W |
|---|
Product Description
PP Yarn String Wound Filter Cartridge 58 mm Water Filteration Treatment Parts
PP yarn string wound water filter cartridge :
From the textile fiber yarn with good filtration performance of precision winding in the porous skeleton refined . The yarn materials are polypropylene fiber , acrylic fiber , cotton fiber and so on . By controlling the winding twist and tightness of the yarn , the filter can be made with different precision , which can effectively remove all kinds of liquid suspended matter and particle impurities . It has high purifying effect on all kinds of liquids .
String wound filter cartridges are manufactured from a variety of carefully selected raw materials . For example , polypropylene yarn , cotton yarn , glass fiber yarn and etc . After carding & spinning into roving they are wound into cartridges with carefully controlled micron rating , to removal of particulates from liquid . Customer can choose different material depend on different filt requirements .
String wound filter cartridges are demanded due to high dirt holding capacity and its rugged construction which allows facing different applications in liquid and gas filtration .
Specification :
| Material | Membrane : | PP,cotton |
| Core : | PP | |
| O ring/Gasket : | Silicone , EPDM , Buna , Viton , Teflon | |
| Specifications | Pore size(um) : | 1 , 5 ,10 , 20 , 30 , 50 , 100 , 150 Micron |
| Outer Diameter(OD) : | 60mm,61mm,62mm,63mm,115mm(can be decided by client) | |
| Length(inch) : | 5 " 10 " 20 " 30 " 40 " ( can be decided by client) | |
| Technical data | Max differential pressure : | 4 .5 bar at 25°C |
|
Recommended change out : |
1 - 1 5bar | |
| Max temperature : | PP yarn + PP core ( 80°C ) Cotton yarn |
Caution :
1 . In order to ensure that water purification products to meet customer demand , the installation staff should ensure that the water purifier water quality , water pressure , water flow , water temperature and other parameters to meet the requirements of the product performance parameters . If the water quality is not municipal tap water , you need to increase in front of the water purifier front filter device . If the water pressure is too large (more than 3 kg) , you need to install the front of the water purifier valve . If the water pressure is too small (less than 1 kg) , you need to install the booster in front of the water pump . When the water purifier installed in the water heater and other hot devices in front , should ensure that the water purifier installation location is lower than the position of the water boiler to prevent the water inside the steam into the water purifier , damage to the water filter .
2 . Water purifier on all the pipes , joints , taps and other wading accessories should be consistent with national health standards .
3 . The northern region do not install in the outdoors , to prevent freezing crack ultrafiltration , and should prevent direct sunlight .
4 . When tightening the installation of threaded joints can not be too much force to prevent the joint thread slip teeth .
