AC 220V Plug In Socket Tester Insert Pull Out Tester 0.01MM Fine Tuning Distance

AC 220V Plug In Socket Tester Insert Pull Out Tester 0.01MM Fine Tuning Distance

This machine is suitable for all kinds of connectors of the insertion force and pull-out test, with the

patented design of the automatic heart device, will be fully accurate plug power test, the use of

WINDOWS, Windows Chinese screen settings, simple and convenient

1, the determination of the maximum load: 50,20,5,2 kg

2, the minimum decomposition: 0.01kg or 1g

3, the maximum test height (test conditions, displacement curve, life curve, inspection reports, etc.) :

150mm

4, the smallest fine-tuning distance: 0.01mm

5, the determination of speed range: 0 ~ 200mm / min

6, X, Y axis moving range: 0 ~ 75mm

7, transmission: ball screw

8, drive motor

9,Size: 360 × 260 × 940mm

10, Weight: 67kg (machine)

11, Power supply: AC 220V Features: To solve the problems of various connector testing fixture, and

testing male and female connectors can automatically align, Unilateral problem.

Test items:

single-hole connector plug connector test

plug the whole row plug-in test

connector connector pin single-pin and plastic retention test

connector NORMAL FORCE test

general compression, tensile failure test

* Can be connected with the contact impedance machine at the same time (optional) Features:

* Printable graphics (plug displacement curve, life curve, inspection report)

* Test data stored on the hard disk (each data can be stored , Unlimited number of times)

test conditions are set by the computer screen, convenient and fast (including plug travel, speed, pause

time, etc.)

test report can be transferred to EXCEL editing standard equipment:

1) 8818C test machine Ontology.

2) control system (industrial computer and control interface, computer screen, printer) Window system

plug control operation software

3) load cell

4) X-Y mobile station

5) the whole row of connectors with automatic correction device.

6) single-roller device with automatic correction device position.

7) The whole row of connectors with clamps

8) single connector with the fixture

9) clip a set of accessories to choose purchase:

10) micro-ohm testing machine and the use of software, connection GPTB interface card.

11) groove milling machine and its special folder (variable type plastic connector for folder gnaw and long

jaws)

12) a single pin and the plastic holding force special fixture.