2G / 3G / GSM 17dBi Directional Panel Antenna Sector Antenna 65 / 90 Degree
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Hangzhou, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | HYS-151717DE-65F |
|---|
Product Description
High Performance 18dBi Directional Panel Antenna 65 Degree RF Outdoor, 400W Input Power
Features
This Antenna is suitable for 2G/3G GSM/CDMA1525~1720MHz system.
Type is directional pannel.
Use Fiberglass or PVC as radome material.
Pure copper N female
Zinc Alloy Vibrator
Zinc alloy material outer tin plating, effectively prevent aging, improve life antenna, raise the antenna gain, reduce the loss of transmission.
Electrical Specifications
Frequency Range (MHz) 1525~1559 1626.5~1660.5 1670~1710
Polarization ±45°
Gain (dBi) 16.5 17 17
Electrical Downtilt (°) 0~10
Isolation (dB) ≥30
Cross-polar Ratio (dB) ≥15(Maindirection 0°)
Impedance (Ω) 50
VSWR ≤1.4
Intermodulation IM3 (2×43dBm carrier) ≤-155 dBc
Maximum Input Power (W) 250
Lightning Protection DC Ground
Half-power Beam Width (°) Hor: 65 Ver: 5~9
Sidelobe Suppression (dB)
(First Sidelobe Above Main Beam) 0º...5º...10º 17...17...17
Front-to-Back Ratio (dB) ≥30 (+/- 20°)
Mechanical Specifications
| Wind Loading Area (m²) | 0.22 |
| Connector Position | Bottom |
| Height×Width×Depth (mm) | 1345×160×80 |
| Packing Size (mm) | 1855×215×160 |
| Antenna Weight (kg) | 7.6 |
| Installation Kit Weight (kg) | 2.7 |
| Packing Weight (kg) | 12 |
| Mounting Hardware (mm) | φ50~φ115 |
| Max. Wind Velocity (m/s) | 60 |
| Reflector Material | Aluminum Alloy |
| Radome Material | Fiberglass |
| Radome Color | Grey |
| Mechanical Tilt (°) | 0~10 |
| Operating Temperature (°C) | -50~65 |
| Connector | 2×7/16DIN-Female |
Installation Instructions
A. Maintenance instruction
a. Electro dip angle adjustment
1)Manual regulation: manually rotate the adjusting knob at bottom of antenna to control the downdip angle
2)Electrical control: refer to the instructions of RCU
b. Adjustment of mechanical inclination: adjustment of mechanical inclination release the clip code bolt on the antenna, adjust the downdip angle according to the instruction of tag on the clip code.
B. Step
1)Before install the antenna, clip code should be pre-install on the antenna
2)Install the clip code on the pole, screw up all the binding bolt of clip code(torque 25N.M)
3)Regarding adjustable mechanical angle mounting bracket, adjust the downdip angle according to the inStruction of tag on the clip code
4)After adjustment, screw up all the hinge bolt(torque 25N.M)
C. Notice
All the fastener bolts should be screwed up
Packing List: Antenna body, clip code, product specification
Radiation Pattern
1525~1710MHz
Port Detail
