Multi holes steatite terminal block

1.Description

This part was made in high purity Steatite ceramic material.  It was white connectors block, which was designed per customer request.  The insert was brass or nickel plated steel. The size was 68.5*18*15.7mm and hole was 3mm and net weight was about 42.1g

Steatite connectors(68.5*18*15.7mm, 3mm diameter,, working condition 250V, current 15A)

2. Physical performance 

They were widely used in electrical components field . The steatite material was one of the best resist high temperature ceramic material. Also, they can had the very good insulation performance. After assembled with brass inserts, the whole parts can work very well in the condition to meet customers' physical performance request. The working condition can be voltage was 250V and current was 15A.

3. Process

1)We will design and make the very precise mould per customer drawings dimension request. 

2)This parts outside dimension can be 68.5*18*15.7mm cermaic outer connector. We will also think of the inserts dimension matched the mould and gurantee the whole parts can be assembled very well.

3)Generally, we will use the hot forming process to burn and form this ceramic parts.The temperature was very sensitive for steatite material to affect the dimension changing or out of specification.So will adjust it per the different lot material characteristic to gurantee the dimension was in specification.

4) After finished them, we will arrange the inspection for the dimension and apperance , then assemble them with inserts. The insert was brass and had the good performance in conductivy electricity.  Then, the whole assembled parts can work very well in the condition to meet customer request.

5)Carefully packing them to gurantee without any crack in transitment. Using soft plastic bags and carton and enforce the pallet before sea shipment .

4. Insert

We can use the brass inserts, the cost was high, but the performance was very good. We also can use the steel insert nickel plated and it was also was very nice appearance ,also the cost was lower . So it was up to you.

5. Capacity

Each month 30,000pcs. We also can adjust our production capacity per your request.

6. Quality and shipment

We will inspect all our parts before shipment to gurantee the dimension was OK and the appearance without any defects.

Our quality system was ISO 9001. We will always supply customer ontime shipment service. 

7. Quality feedback

If you found out any defects in the shipment, we will send you the addtional quantity to you soon as we can. And i will give

you the 8D report to find the root cause to avoid this next time. All your any concerning or complaint, it will be replied in 24 hours.

8. Payment

We can accept TT. And if you have concerning,  we can have discussion

9. Customer service

We can design the parts per customer request and parts working conditions. We also can make the parts per customer

drawings request.

10. Advantage(Why you should choose us)

We were very specialized in producing the ceramic connectors. We had so many specification connectors in our inventory. we can supply you various connectors with different request of inserts. So we can use a very low cost to make the connectors under high quality level. Many parts we had moulds inventory, so you need not pay the mould cost again. It will be much benefit for you and decrease your risk.We were not trading company. We were professional manufacturer. We can control the whole process from material to finished parts and shipment and business process. We can export the parts ourselfves and can save so much cost and keep the prices competitive. It was right that you choose us.

11. We added another production line to burn more parts in one time to gurantee all the dimension more even and

gurantee the shipment on time.