Stainless Steel Centrifugal Submersible Dewatering Pump For Cabin Ponding
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Shanghai, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | CP |
|---|
Product Description
Stainless Steel Centrifugal Submersible Dewatering Pump For Cabin Ponding
Application:
| 1 | Pasturage drainage. |
| 2 | Cabin ponding . |
| 3 | Waste water drainage. |
Features:
| 1 | The leakage detector offers pump an automatic protection |
| 2 | Not stamdard accessories, the power not lower than 18.5KW is optional |
| 3 | Built-in heat protector in motor, it secures the protection of motor against burning out. |
| 4 | The power lower than 15KW is optional,not lower than 15KW is standard accessories. |
| 5 | overload & overheating to Built-in heat protector in bearing, when the bearing is abnormal and the temperature rises to disconneting temperature, |
Points for attention before starting equipment:
Warning:The water pump shall not be moved without putting off the power source. Humans shall not contact the water source where the pump is located when pumping water to prevent electric shock accidents in case there is no current leakage protective device while there is current leakage with the pump.
-
Check whether the power and the voltage frequency used are in line with those listed on the label.
-
Before installation, check the rotation direction of the motor, the correction rotation direction is that the motor rotates counter-close seen from the suction direction of the impeller. If the rotation direction is not right, the connection positions of any two phases in three phases shall be shifted to get it rotate in a correct direction.
-
Check whether the operation of the level controller is in normal so as not to affect the service life of the submersible motor.
-
Operation without water is prohibited.
-
Lifting and hanging the motor with the motor cable is prohibited during the transport and installation processes.
Read this Installation, Operation and Maintenance Manual carefully to guarantee the safe operation of the equipment.
The safety notice in the manual includes warning and points for attention:
Warning means possible dangers, which may cause human loss or serious injury etc if ignored.
Construction:
| No. | Name | Material | |
| GB | JIS | ||
| 1 | Neck bolt | 2Cr13 | SUS420 |
| 2 | Heat-Protector | - | - |
| 3 | Motor cover | HT200 | FC200 |
| 4-1 | Bearing | - | - |
| 4-2 | Bearing | - | - |
| 5 | Cooling house flange | Q215A | LSS330 |
| 6 | Shaft | 2Cr13 | SUS420 |
| 7 | Rotor | - | - |
| 8 | Stator | - | - |
| 9 | Cooling house | 0Cr18Ni9 | SUS304 |
| 10 | Bearing cover | HT200 | FC200 |
| 11 | Motor casing | HT200 | FC200 |
| 12 | Bracket | HT200 | FC200 |
| 13 | Leakage detector | - | - |
| 14-1 | Mechanical seal | C-Al2O3 | C-Al2O3 |
| 14-2 | Mechanical seal | SiC-SiC | SiC-SiC |
| 15 | Oil box | HT200 | FC200 |
| 16 | Oil cover | HT200 | FC200 |
| 17 | Washer | 0Cr18Ni9 | SUS304 |
| 18 | Impeller nut | HT200 | FC200 |
| 19 | Seal-ring | LBC2 | LBC2 |
| 20 | Strainer | HT200 | FC200 |
| 21 | Impeller | HT200 | FC200 |
| 22 |
| ||