High Performance Tri Lobe Roots Blower Cast Iron Efficiency Capacity 149.4 m3/h
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Shanghai, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | RSW/TRS |
|---|
Product Description
High Performance Tri Lobe Roots Blower Cast Iron Efficiency Capacity 149.4 m3
Application:
| 1 | Increasing oxygen to promote the fermentation |
| 2 | Use washing fluid washing car base on siphon principle |
| 3 | The mechanical arm carrys the paper after it has been rised by the wind |
| 4 | Use gas blowing sand to flush pipes |
| 5 | Stir gas liquid, make its uniformity |
| 6 | Do body massage, promote the blood circulation |
Features:
| 1 | Wide range of capacity and pressure. Calibre: 50mm-300mm (2 "-12") Capacity: RSW 2.5~171.1m3/minTRS 1.14~166.49m3/min Pressure: The pressure of one-stage RSW type up to 10000mmAq (1.0kgf/cm2) The pressure of two-stage TRS type up to 20000mmAq (2.0kg/cm2) |
| 2 | Delivers completely oil-free air. |
| 3 | Simpler and solider structure, less trouble. |
| 4 | Highest quality pilot & accurate great applied, long life and low noise assured. |
| 5 | The special cooling design can efficiently reduce the temperature of the lubricate oil in the oil box and gear case, and then make sure the blower’s gear and shaft having a long service life operating under a high pressure. |
| 6 | TRS is a two-stage blowers in series, through two times pressurize,the air in the blower can get a high pressure. Through the condenser’s cooling system, the air discharged from the one-stage blows outlet can be efficiently cooling down, the temperature of the air at the suction inlet of the second stage blower can be below 40, which can make sure the regular operation of the second stage blower. |
Construction:
| NO. | Name | Material | |
| GB | JIS | ||
| 1 | Casing | HT250 | FC250 |
| 2 | Bearing housing | HT250 | FC250 |
| 3 | Oil box | HT250 | FC250 |
| 4 | Oil splash | Q235 | SS400 |
| 5 | Bearing washer | Q235 | SS400 |
| 6 | Framework oil seal | NBR | NBR |
| 7 | Pulley | HT250 | FC250 |
| 8 | Drive motor | HT250 | FC250 |
| 9 | Driven rotor | HT250 | FC250 |
| 10 | V-ring | NBR | NBR |
| 11 | Bearing | GCr15 | SUJ2 |
| 12 | Gear | 20CrMnTi | SCM415 |
| 13 | Lock washer | Q235 | SS400 |
| 14 | Lock nut | 45 | S45C |
| 15 | Gear box | HT250 | FC250 |
| 16 | Lubrication plug | 45 | S45C |
| 17 | Purge plug | 45 | S45C |
| 18 | Oil gauge | Assembly | Assembly |
Performance Parameters:
| Model | RPM | 10000mmAq | 11000mmAq | 12000mmAq | 13000mmAq | 14000mmAq | ||||||||||
| Qs | La | N | Qs | La | N | Qs | La | N | Qs | La | N | Qs | La | N | ||
| TRS-300 | 700 | 73.90 | 169.83 | 200.0 | 72.90 | 184.60 | 250.0 | 71.90 | 199.37 | 250.0 | 71.05 | 215.98<
| ||||