Domestic Sewage Treatment Plant Membrane Air Diffuser EPDM Easy Installation

Domestic Sewage Treatment Plant Membrane Air Diffuser EPDM Easy Installation

Master parts parameters:

1. Material: ethylene propylene diene monomer (EPDM);

2. Thickness: 2.0mm±0.15mm;

3. Tensile strength:13.94MPa(ASTM D412);
4. Maximum extensibility: 650%(ASTM D412);

5. Tearing toughness: 54kgf/cm2(ASTM D624 Die c);

6. Rigidity: 52 DUROMETER A (ASTM D2240);

7. Starter size: 1mm; 8. Effective area: 0.0375m2

Features:

1. RSD245, 330 fine bubble disc aerator High oxygen transmission efficiency.
2. Good effect on saving power, and low operating cost.
3. Excellent counterflow prevention function.
4. Long guaranteed life.
5. Good sealing effect.
6. Easy installation.

Moisture purge system:

The temperature of the air will become very high after compressed by the blower of the blast aeration system (usually up to 50- 90), and the water vapor and oil component in the hot air will condense and cumulate in the aerator pipeline. The water removal system can discharge the condensed water in the aerator pipeline and the waste water that has entered the pipeline through aerator when the blower shuts down, and avoid blockage of micro-pores.

Construction:

Headloss curve:

OTE curve:

Installation: