Place of Origin: | Zhejiang |
---|
Location: | Shanghai, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Model No.: | AR |
---|
Small Jet Submersible Pump Aerator For Aquaculture High Filtration Rate
Application:
1 | On the contrary, gigantic quantities of waste water were brought by the industrial manufacturing |
2 | In the meantime, large quantities of household waste water were also resulted from our daily life. |
3 | All these have affected the living quality and damaged the environmental ecology. |
Features:
1. It has mixing function while aerating
2. Adopt double mechanical seal
3. Mechanical seal can extend usefullife of motor.
4. Dual protection, using a high filtration rate of the filter mesh to prevent particles from entering aerator body while maintaining the air input capacity.
5. Enlarge the space between the impeller and the mixing chamber to avoid the impeller being
AR Structure:
No. | Name | Material | |
GB | JIS | ||
1 | Cable | 2RNCT | 2RNCT |
2 | The motor cover | HT200 | FC200 |
3 | Ball bearing | - | - |
4 | O-ring | NBR | NBR |
5 | Motor casing | HT200 | FC200 |
6 | Main shaft | 2Cr13 | SUS420J1 |
7 | Bracket | HT200 | FC200 |
8 | Mechanical seal | C-Al2O3 | C-Al2O3 |
9 | Lubricant | ISO VG32 | ISO VG32 |
10 | Mechanical seal | SiC-SiC | SiC-SiC |
11 | Oil cover | HT200 | FC200 |
12 | Aeration housing | HT200 | FC200 |
13 | Bottom cover of aeration housing | HT200 | FC200 |
14 | Entrance panel board | NBR | NBR |
15 | Screw | A2-70 | A2-70 |
16 | Gasket | 3Cr13 | SUS420J2 |
17 | Impeller | ZG0Cr18Ni9 | SUS304 |
18 | Ball bearing | - | - |
19 | Stator | - | - |
20 | Rotor | - | - |
21 | Terminal box | HT200 | FC200 |
22 | Lifting rings | 0Cr18Ni9 | SUS304 |
Performance parameters:
Type | Power | Operation range (m) |
Min-max water depth (m) |
Air inlet pipe diameter (mm) |
The maxium intake of air (m³/h) 50HZ/60HZ |
NO.of outlets 50HZ/60HZ |
Weight (kg) |
Cabtyre Cable | ||||||
hp | kW | Power cable | Control cable | Length m |
Material | |||||||||
NO | Coresxmm2 | NO | Coresxmm2 | |||||||||||
AR5(6)1.5-40 | 2 | 1.5 | 1.0-2.0 | 1.0-3.0 | 40 | 40/40 | 8 | 135 | 1 | 3*1.5+1*1 | 6 | Chloroprene Rubber or PVS |
||
AR5(6)2.2-50 | 3 | 2.2 | 2.5-5.0 | 1.0-4.0 | 50 | 60/60 | 8 | 147 | 1 | 3*1.5+1*1 |
|