5 Tons Hydraulic Uncoiler Steel Cable Tray Roll Forming Machine Ladder Type
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Wuxi, Jiangsu, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | S&G-C Purlin |
|---|
Product Description
Chain Driven Cold Rolled Steel Cable Tray Roll Forming Machine,cable tray ladder type roll forming machine
Company Introduction
S&G is prefessional making different kinds of the roll forming machine.
we have more than 10 years experience in making the roll forming machine.And our machine is customized made according to customer's sheet profile drawing. We have a strong enginner team to design the machines for you! And we also own a strong and mature after sales service team to offer you any service to help you with your sheet production by our roofing machines.
Equipment struction introduction.
This production line may produce the cable tray, the different sizes through the replace punching moulds to complete. Forming machine is combined and adjustable, one set of combined rollers complete all cable tray products, the change size through adjust distance of rollers to complete.
Main Technical Parameters
Width of Material Sheet: 200-950mm
Thickness of Material sheet: 1.0~2.0 mm
Material: cold steel coil & hot steel coil
Line Speed with Punching: 2-4m/min
Length of Finished Product: 2000-6000mm(2440/3000mm)
Straightness Tolerance of Finished Product: 1-1.5 mm/1500mm
Angle Tolerance of Finished Product: ≤±1.5/1000mm
Anti-hazard Classification of Motor: ExdIICT4
Grade of Protection of Motor: IP55
Total Power: about 94.5KW
Forming Product Range
Cable Tray, Maximum Thickness: 1.0~2.0 mm
Width of Product: 100-600mm
Maximum Height of Product: 150mm
General Structure of Equipment
1. Auto Decoiler
Width of Material Sheet: 200-950mm
Thickness of Material Sheet: 1.0~2.0mm
Inner Diameter: 508mm
Range of Expanding: 480-520mm
Maximum Outer Diameter: φ1300mm
Loading: ≤8T
Power of Motor: 7.5KW frequency controlled
Type of Expand: hydraulic expanding
Type of Press Coiler: air-powered press
Feeding Speed: 0-10m/min, adjustable
2. Leveling Machine
Working roller: nine rollers type leveling machine
Feature of structure: after the quenching and tempering, chrome-plating processing, the rigidity, surface roughness of the roller etc. are all enhance greatly; It is composed by the clamping roller and the leveling roller, the clamping roller may the independent control, the leveler has one pair of horizontal guide roller and two pairs of vertical guider roller and easy to adjust by hand wheel.
Between the leveler and the feeding device, there is optical sensor, sends out the feedback signal to the control system, the control system sends out the instruction to the frequency conversion motor to change speed to control the storage quantity of the sheet. Achieves the uninterrupted level goal.
3, Function: material feeding
Feature: uses the servo motor-driven .Multistage type feeding: May input 10 group of different feeding lengths, The liquid crystal touching screen demonstrated is advantageous for the change, establishes various technical parameters. The auto-induction start system and the punch press linkage (control punch press start).
4. Punching Press
Type of Punching Press: JF21-200
Punching Press: uses the steel plate welding fuselage, the rigidity is strong with good appearance. Uses the combined type air operated friction clutch.
5. Hydraulic Cutting Device
Type: hydraulic cutting
Punching mould is located end of hole punching section, it is separate operation device, the servo-feeder to position the length and cutting. The material of cutting blade is Cr12MoV, can the working piece without burr and also have the feature of easy change and long service life.
Technical parameters
|
No.
|
Part Name
|
Type of Equipment
|
Qty (set)
|
Approximate Weight(T)
|
Motor Power(KW)
|
|
1
|
Decoiler
|
|
1
|
4
|
7.5+3
|
|
2
|
Leveler
|
|
1
|
2
|
11
|
|
3
|