Galvanized Plate PU Sandwich Panel Production Line Metal Panel Material
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Wuxi, Jiangsu, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | S&G-PU Sandwich Wall Panel |
|---|
Product Description
Continuous PU (Polyurethane) Sandwich Panel Production Line,Thickness:0.3-0.6 mm,colored steel plate, galvanized plate
The PU sandwich panel made of upper and bottom both metal steel panel and inject the PU liquid inside of them then after curing and then extrusion.
Superior Polyurethane adhesive property can make whole block between foam and metal panel and not need other material to stick again.
The metal panels can be extruded to various shapes and assure high stiffness and capacity
Introduction of production line:
Superior Polyurethane adhesive property can make whole block between foam and metal panel and not need other material to stick again.
The metal panels can be extruded to various shapes and assure high stiffness and capacity
Introduction of production line:
1, Components
The PU continuous production line composed of un-coiler, Cut off the docking, filming, rib/forming, preheating, foaming, continuous solidify, cutting, stacking and packing etc. with high Automation and stable performance.
Uncoiling area:
Uncoiling area includes two sets uncoilers, Roller Conveyors, sending device, cutting device, filming device etc.
Roll forming area:
There are upper and lower roll forming machine and quick change system, it is possible to produce various profiles to meet diversified demands.
Foaming area:
Foaming area composed of High pressure PU foaming machine , casting machine and double crawler etc.
PU provided foaming machine with electrical metering mechanism, automatic coil provided system to insure the material mixed according to ratio, spraying equally, the double crawler with accurate temperature control system and safety foaming processing to assure foaming equally and stable.
Saw cutting area:
Saw cutting area includes saw and milling machine to finish scale cut off.
Stacking and packing:
Stacking and packing consists of fast transiting conveyer, automatic turn-over, stacking and packing system etc. it is easy to assure the production on line and avoid damage and losing during transiting to improve the production efficiency.
Automatic control system:
The production adopts Siemens control system, Humanized interface easy to operate, monitor and adjust the parameters to assure production running stable and effectively.
The production line is designed after study and research abroad advanced technology, which provided with international advanced lever.
Technique data(Roll forming parts:
| Coil types | pre painted coil/stainless steel |
| Coil thickness | 0.35-0.80mm |
| Coil weight | Max: 10T/7.5T(option) |
| Coil width | Max: 1250mm |
| Length of roll forming unit | Approx: 35-40m |
| Coil inner diameter | Standard: Ø508mm |
| Coil outer diameter | Max: Ø1100mm |
| Line speed: | 1.5-12m/min |
| Constringent air | Max: 4-9Kg/cm2 |
| Power | 380V/50Hz |
| Roll former type | Used in roof, wall and refrigeratory Panel (grooving, SS, RP, boltless) |
| Operation height | From the ground: 1300mm |
Specifications:
| Material | Raw material | colored steel plate, galvanized plate, or aluminum plate |
| Thickness | 0.35-0.8 mm (As customer`s need) | |
| Feeding width | 300mm-1250mm (According to customer`s profile) | |
| Material hardness: | 550 Mpa---350 Mpa | |
|
Hydraulic Uncoiler |
Inner Diameter | 500-600mm |
| Max Coil width | 1500mm | |
| Capacity | 10T/7.5T | |
| Hydraulic cylinder lift stroke | Up panel 0.5m, Down panel 0.5m | |
| Coil car stroke | 2.5m | |
| Pressure of hydraulic system | 6.3Mpa | |
|
Main Forming |
Forming steps | 24 stations ( Depend on Profiles ) |
| Shaft diameter | Φ60mm | |
| Design type | Middle plate welded | |
| Transmission | Gear box (Chain and gear box depend on thickness and customer`s need) | |
| Machine frame | 350# H steel welded; Steel plate welded/ Memorial arch frame type | |
| Roller material | Gcr15MoV | |
| Shaft material | 45# steel with tempering | |
| Cutting blade material | Gcr12MoV quenched | |
| Working speed | 1.5-12m/min | |
| Power of machine | 32KW (According to the thickness) | |
| Type of cutting | Hydraulic | |
| Cutting tolerance | ±1mm | |
| Material of blades | Gcr12 quenched | |
| Cutter quantity | 1 set | |
| Working pressure | 20MPA | |
| Pre-heating Room | Temperature sensor | Hot couple |
| Temperature adjustment | Automatic control by temperature control equipment | |
| Hot air motor | 18.5Kw | |
| Hot air heater | 200Kw | |
| Heat type | Heated by electricity and air circulate | |
| Flying Saw Cutting Machine | Outline dimension of band saw cuttin
|