Clamshell Blister Plastic Vacuum Forming Machine 220V / 380V Independent Cooling System

Clamshell Blister Plastic Vacuum Forming Machine 220V / 380V Independent Cooling System

.  Main Application

This type machine can be used for plastic film for all kinds, such as toys, hardware, food, electronics, medicine, with a transparent film coating repacked in a board, form a seal packing.

This type machine can also produce plastic ceiling panel, cake boxes, lunch boxes, automobile materials and sanitary materials etc, which can be produced with three-dimensional relief pattern like 3D advertisement products.

Suitable material: PVC, PET, PP, PC, ABS, PS, EPS, HIPS, LDPE, HDPE and all thermoplastic sheet.

. Introduction of Vacuum Forming Machine

1. This machine is automatic. Just after placing plastic sheet onto the frame, then heating,

 forming, cooling, can be done automatically.

2. The control board is near the operator, so it can be operated easily,

greatly improve the efficiency of production.

3. The far infrared ceramic heating elements can control every single block

heater temperature,more power saving features, and reducing production cost.

4) The furnace is guided automatically.

5) The cooling system is independent by cold water.

6) This machine can form all kinds of blisters just replace mould.

.  Working Processes of Vacuum Forming Machine

Carry materials manually→ clamp the materials → move the material into the oven,(while we can use blow function to keep material not drap down), after the material to soft →take the material to forming area → Bubble blow the material before vacuum (this is important function) → the vacuum will auto start→ open the fan to cold→ separate the model and material →take the material out.

IV. Principles of Vacuum Forming 

The technology of Vacuum Forming is a method for thermo-forming. It is a method of

using thermoplastic sheet to make an opening of the housing of the article. Cut the plastic sheet into special size first, and then heat and soften the sheet through the huge pressure difference on both sides of the sheet or mechanical pressure, this can make the sheet attached with the surface of the mold after heating and deforming, next through cooling and shaping, the sheet can be vacuumed into various shapes of cover, plastic trays, bubble shell etc.

The technology of vacuum forming relied on vacuum force which can make the sheet achieve tensile deformation. Vacuum force is easy to be realized, grasped and controlled, so it is the earliest, a thermal forming method ,which is widely used currently.

V. Main Features

1). Independent temperature control system:

Adopting dense, plate and special far infrared ceramic heating brick to assemble the machine. It can reach exact temperature within 5 minutes. Steady temperature can assure high quality of product when use PVC,PET or other environmental materials. Also, it can save more power that traditional machine, using the time of cooling and demoulding after forming to heat the material , so it will not influence the forming speed.

2). Adopting solid-state temperature controller,which has independent, automatic

voltage regulator function, when the external voltage changes in a range, it can ensure the stable temperature.

3). The electric furnace are equipped with cylinder to push, and it has electromagnetic valve buffer system, so this can make the electric furnace stable and durable

4). The machine has complete functions like“ delay vacuum, vacuum, vacuum with the wind, Spray, cooling wind”, all these can make it convenient and for workers to operate it accurately in actual production, and ensure the perfect vacuum forming process in a best time for high technology products.

5). Equipped with auto spray mold-release agent, the machine has two functions:

vibration demould and mold blowing, so this can make it easy for formed sheet to release from the mold

6). Die die blowing function: die into the mold and blowing, make the film formation or summon up, then forming a more perfect product.

7). Precise positioning function of clip, ensure the material placed at the exact position

8). The cooing fan is controlled by inverter, volume of the wind can be adjusted easily.

9). Quick die change function (Automatic Locking); Intelligent temperature control system, servo mechanical transmission system, imported electrical control system, etc.

VI. What is thermoforming?
Thermoforming is the process of the heating a plastic sheet and shaping it with air pressure or vacuum on a mold. After the sheet is formed, it is cooled to obtain the final form. In vacuum forming a negative pressure is used in the molding step.

In our more than 20 years of designing and engineering economical machines for these processes, we have received thousands of calls and heard them called many things. Among the more common names these machines have been call are: vacuum forming machines, thermoforming machines, sheet fed vacuum forming machine, vac formers, roll fed thermo forming machine, blister packaging machines, pressure formers, and many, many others.

Whether you call it vacuum forming, thermo forming, or pressure forming;CONNIE-Machine has been meeting the needs of cost conscious businesses wordwide for over 20years.

At Connie Machine, we design and manufacturer all types of vacuum forming machins and vacuum forming machinery to meet any size and technical application. Whether you are looking for light duty vacuum forming equipment or heavy duty thermoforming equipment, we manufacturer it all. Our quality thermoforming machinery is designed simplistically for speed, endurance, and ease of operation.

With thermoforming, it is possible to avoid the substantial start up costs and extended time to market associated with injection molding. Many design features and specifications associated with injection molding, such as sharp detail and close tolerances are now possible in high or low volume runs with the Connie  Machine technically-advanced thermoform processes.

VII. Main Technical Parameter

VIII.  Our advantage

1,  We have 20 years experience in H.F technology.

2,  We have professional designing team .

3,  We can offer technical staff go to abroad for installation and do training for all of customer from all over the world.

4,  We have many agents for selling and service for customers all over the world.

5,  We have build up office in India,Turkey,British etc. We offer the fast ,high value service to customers.

IX.  Our Service

1. Customer's site installation, training & maintenance available

2. 12-24 hours Online service by Email, Fax, Video Online for basic setup and repairs

3. 12 months warranty for machine, life-long tech. support

4. Recommend equipment of top choice based on your requirements for product;

5. Examining mold drawings on your behalf to confirm optimum structure size meeting high frequency process;

6. Providing assistance in manufacturing and modifying tools;

7. Our engineering instruction will guarantee your productive manufacturing of top-quality products.

X.  FQA

Questions 01. How Do You Pack the machines?

RE: Our machines will be packed into wo