Chemically Resistant Industrial Ceramic Parts For Mechanical Equipment
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Dongguan, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | MR-IN-0613 |
|---|
Product Description
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment
Fine Diamond Machining Full Density Parts
Ceramic parts fired to their full density are too hard for machining with tool steel cutters or even conventional methods. Following a final firing, when as-fired tolerances are not sufficient, fine diamond machining (grinding) using diamond impregnated cutters is often required. Features Ceramic commonly fine diamond machines into fully fired ceramic parts include:
§ Diameters and surfaces that have tighter tolerance requirements than can be achieved in the as-fired condition
§ Ceramic tubes and special extruded rods requiring fine features or tolerances
Also, fine diamond machining is used at Ceramic to machine non ceramics, including quartz.
No Machining All – Depending upon the requirements of the custom ceramic part, the geometry and final tolerances can often times be achieved during the near-net shaping injection molding process. This is the most cost effective solution. Features Ceramic commonly achieves with no machining whatsoever include:
§ Fully functional ceramic screw threads
§ Square holes that cannot be machined
§ Specific radii and fillets
§ Other complex geometries that cannot be machined
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.
Product Description
Precision Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries. Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs. Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment, Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment
High temperature ceramics – crucibles, nozzles, lasers, furnace/kiln fixtures
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment
Wear and corrosion resistant ceramics – plates, housings, gages, caps/lids
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment
Electrical insulation ceramics – contact blocks, standoffs, fasteners, spacers
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment
Precision Ceramics is one of the world’s premiere technical ceramic suppliers – contact us to see what technical ceramics we can create for you.
Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium | | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Low Coefficient Of Friction Industrial Ceramic Parts Mechanical Equipment |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .
Mingrui ceramic manufacture and provides alumina ceramic components for a wide range of application like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry etc. According to actual application and customer's requirement, the purities vary from 95%-99.7% and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection moulding, extrusion moulding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex components for customers worldwide.