3mm bluish green 505nm high brightness light emitting diodes / infrared led emitter

3mm bluish green 505nm high brightness light emitting diodes / infrared led emitter

• Features:

• Choice of various color.
• Available on tape and reel.
• Reliable and robust.
• The product itself will remain within RoHS compliant Version.

• Descriptions:

• The series is specially designed for applications requiring higher brightness
• The LED lamps are available with different colors, intensities.

• Applications:

• TV set.
• Monitor.
• Telephone.
• Computer.
• Circuit board.
• Status indicators.
• Commercial use.
• Advertising Signs.
• Back lighting.

• Package Dimension:

  Notes:

• All dimensions are in millimeters (inches).
• Tolerance is ± 0.25 mm (.010″) unless otherwise noted.
• Protruded resin under flange is 1.00 mm (.04″) max.
• Specifications are subject to change without notice.
• Absolute Maximum Ratings at Ta=25

• Parameters	Symbol	Max.	Unit
  Power Dissipation	PD	120	mW
  Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)	IFP	100	mA
  Forward Current	IF	30	mA
  Reverse Voltage	VR	5	V
  Operating Temperature Range	Topr	-40 to +85
  Storage Temperature Range	Tstg	-40 to +100
  Lead Soldering Temperature [4mm (.157″) From Body]	Tsld	260 for 5 Seconds

  Electrical Optical Characteristics at Ta=25

  Parameters	Symbol	Min.	Typ.	Max.	Unit	Test Condition
  Luminous Intensity *	IV	4000	6000	---	mcd	IF=20mA (Note 1)
  Viewing Angle *	2θ1/2	---	30	---	Deg	IF=20mA (Note 2)
  Peak Emission Wavelength	λp	---	500	---	nm	IF=20mA
  Dominant Wavelength	λd	---	505	---	nm	IF=20mA (Note 3)
  Spectral Line Half-Width	λ	---	30	---	nm	IF=20mA
  Forward Voltage	VF	3.00	3.30	---	V	IF=20mA
  Reverse Current	IR	---	---	10	µA	VR=5V

   

  Notes:

• Luminous Intensity Measurement allowance is ± 10%.
• θ_1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
• The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
• Typical Electrical / Optical Characteristics Curves

• (25 Ambient Temperature Unless Otherwise Noted)

• Reliability Test Items And Conditions:

The reliability of products shall be satisfied with items listed below:

Confidence level: 90%. LTPD: 10%.

• Test Items and Results: