| 1 | X,Y,Z Working Area | 1300x2500x200mm |
| 2 | Table Size | 1440X3040mm |
| 3 | Resolution | ±0.03/300mm |
| 4 | Repeatability | ± 0.05mm |
| 5 | Lathe Structure | steel tube frame |
| 6 | X Structure | Rack pinion, linear rails |
| 7 | Y Structure | Rack pinion, linear rails |
| 8 | Z Structure | Ball screw, linear rails |
| 9 | Max.Consume power | 6.5Kw |
| 10 | Max.Speed | 0-32000mm/min |
| 11 | Max.Working Speed | 0-20000mm/min |
| 12 | Spindle Power Motor | 3Kw Italian HSD spindle |
| 13 | Spindle Speed | 0-18000RPM |
| 14 | Working Mode | Stepper motor |
| 15 | Working Voltage | AC220V/380V, 3ph, 50HZ/60Hz |
| 16 | Command Code | G code(*uoo,*nc,*mmg, *plt) |
| 17 | Operating System | DSP System |
| 18 | Interface | Printer port 50pins or USB |
| 19 | System Memory | 128M (or Flash drive) |
| 20 | Collet | ER25(Φ3.175, Φ4, Φ6,Φ12.7) |
| 21 | X,Y Working Delicacy | <0.01mm |
| 22 | Software | Type3 software, Ucancam V9 |
| 23 | Running circumstance | Temperature:0℃~45℃
Relative humidity: 30%~75% |
.jpg)
