Steel Repair Workshop Building

steel repair workshop buildingThe steel repair workshop building in the pictures were designed, constructed and installed by EHSS who are professional and practical in designing, processing and installing. You may give us your own drawings to enable us construct as per your request or you might just give us your ideas, we can design the project based on your ideas. Welcome to contact us for anything you needed.1.size:MOQ is 1000 square meter,  length X width X eave height, roof slope2.type:single slope, double slope, multi-slope ;single span,double-span ,Multi-span, single floor, double floors3.base:Concrete and steel foundation bolts4.column and beam:material Q345(S355JR)or Q235(S235JR) steel, all bolts connection ,straight cross-section or Variable cross-section5.bracing:X or V or other type bracing made from angle , round pipe etc.6.c or z purlin:size from C100~C320,Z160~Z3007.roof and wall panel:single colorful corrugated steel sheet0.326~0.6mm thick ,YX26-205-820(820mm wide),single colorful corrugated steel sheet0.326~0.6mm thick ,YX15-225-900(900mm wide),single colorful corrugated steel sheet0.326~0.6mm thick ,YX35-125-750(750mm wide),single colorful corrugated steel sheet0.376~0.6mm thick ,YX51-380-760(760mm wide),single colorful corrugated steel sheet0.376~0.6mm thick ,YX51-470(470mm wide),sandwich panel with EPS, ROCK WOOL , PU etc insulation thickness around 50mm~150mm, width 950mm or 960mm!8.accessories:semi-transparent skylight belts, Ventilators, down pipe, out gutter etc9.surfrace:Paint or hot dip galvanized10.packing :main steel frame without packing load in 40'OT,roof and wall panel load in 40'HQIf you need we design for you ,pls supply us the following parameter together with details size:1)live load on roof(KN/M2),live load on second floor(KN/M2) if have.2)wind speed(KN/H) or wind load(KN/M2).3)snow load(KN/M2) if have.4)earthquake load if have.5)crane(if have):crane span, crane type, crane quantity, crane lift height, max lift capacity, max wheel pressure and min wheel pressure.6)dimensions: length, width, height, eave height roof pitch and etc.7)insulation materials: sandwich panel or steel sheet.8)Is there any materials that are not allowed to import into the country where the structure is planning to use?9)It's better if you have your own drawings and pictures, pls send them to us.