Computer Control 300J Low Temperature Metallic Automatic Charpy Pendulum impact test Machine

Performance description

1.This type of testing machine is used to test metallic materials to resist the impact to determine

the nature of the material under dynamic load performance. It's a necessary testing machine,

not only used in the metallurgy, machine manufacture etc areas, but also used for the science

research.

2.Controlled by computer and electric appliance, this machine can auto-complete the following

actions: rising pendulum, hanging pendulum, sending specimen, positioning, impacting, temperature conditioning and computer measurement and calculation, which also can display the results and

printed out with high efficiency and high accuracy.

3.After impacting the specimen, the machine can rise pendulum with surplus energy automatically

so as to be ready for the next test.

Main technical index

1.Impact energy:      150J, 300J

2. Range of plate-scale and sub-scale value

Range of energy      0-300J  ,     0-150J

Sub-scale value        2J     ,        1J

3.Pendulum moment(impact constant):

Range of energy      300J           ,           150J

Sub-scale value      160.7695N.m    ,      80.3848N.m

4.Angle of rising pendulum in advance:    150º

5.Distance from centre of pendulum and impacting point:    750mm

6.Impacting speed:   5.2m/s

7.Span of impact specimens supports: 40mm

8.Round corner of nipper jaw: R1-1.5mm

9.Round corner of impacting edge: R2-2.5mm

10. Capacity of specimen case: 10 pieces

11. Cooling way: compressors

12. Range of low temperature: Room temperature~ -60℃

13. Precision of controlling temperature: fluctuation ±1.5℃ grads 2℃

14. Speed of sending specimen:≤2S

15. Size of specimen: 10*10*55mm

16. Size of exterior: 1500mm*850mm*1340mm

17. Net weight of machine: 850kg

18. Electric power: three-phase AC 380V ± 10% 50Hz 5A

19. Environmental condition: non-corrosive media, no vibration, no strong electromagnetic field around