Palisade Rails - Angle Type with Punched Holes

Palisade rail is the horizontal pole between the palisade pales, the horizontal rails and vertical pales are fixed with the bolts and nuts. The material of palisade rail is same as the palisade posts and pales, then the rails will be punched with holes for the bolts and nuts. For general palisade gate and fence, two horizontal rails are enough to fix them, one for the top, the other for the bottom. If the palisade fence or the gate is too high, you need to add one rail for stability.

Specification:

• Material: low carbon steel, mild steel, hot or cold rolled steel, stainless steel.

• Surface treatment: hot-dipped galvanized or electric galvanized, PVC coated, powder coated.

• Type: angle steel type.

• Size: 40 × 40 mm, 45 × 45 mm, 50 × 50 mm, 60 × 60 mm.

• Thickness: 3.5 - 6 mm.

• Holes: 17 or 19 holes for palisade pales, 2 holes for the palisade posts.


PR-1: For general fence, the angle palisade rails can be fixed with the pales and posts on one side.


PR-2: For higher palisade fence, the palisade rails can be fixed with pales through two sides.

We also provide the palisade horizontal rails separately, you can choose suitable one for your designated fence or gate.

Package:
We also provide the palisade horizontal rails separately, you can choose suitable one for your designated fence or gate. The palisade horizontal rails can be packed with wooden pallet, plastic film, metal pallet or as your request.


PR-3: We can also provide palisade rails separately as your require.