S2610-24TC-P Reverse POE Switch 24 port 10/100BaseT MAC Black Hole Port MAC Limit
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | S2610-26TC-P |
|---|
Product Description
S2610-24TC-P Reverse POE Switch 24 port 10/100BaseT MAC Black Hole Port MAC Limit
¨ 24*10/100Base-T
¨ 2*ComboGE (100/1000BaseX SFP or 100/1000BaseT)
¨ 16K MAC address
¨ 512 ACL
¨ 4K VLAN,selective QinQ
¨ 2-24 ports support user side to provide power
¨ First port provides upward -48V DC power.
¨ 440mm*44mm*280mm
Product Specification:
|
|
S2610-26TC-P |
| Backpla-ne bandwidth | 8.8Gbps |
| Forward-ing capacity | 6.55Mpps |
| Port |
24*10/100 Base-T 2*ComboGE (100/1000 BaseX SFP or 100/1000BaseT) |
| MAC |
MAC Black Hole Port MAC Limit |
| L2 features |
IGMP Snooping STP/RSTP/MSTP Remote-loop-detect 802.3ad linkage convergence Port mirroring Vast frame |
| VLAN |
4K VLAN entries Selective QinQ Port-based VLAN Port and protocol-based VLAN ACL-based VLAN |
| Multicast |
512 L2 multicast groups IGMPv1/v2/v3 Snooping IGMP Filter IGMP Fast leave |
| QoS |
Packet limit speed rate of port or self-defined flow receiving and sending Packet mirroring and packet re-direction of port or self-defined flow Priority remark of port or self-defined flow, provide 802.1P,Remark of DSCP priority Advanced queue scheduling of port or self-defined flow, each port/flow supports 8 priority queues, provide the algorithms of SP, WRR, and SP+WRR |
| Security |
Radius authentication SSHv2 Secure Shell Access control based on port and MAC Suppression on broadcast storm |
| Management |
CLI, Console port, Telnet and WEB management SNMPv1/v2/v3 RMON (Remote Monitoring)1,2,3,9 MIB GN.Link Server NGBNView network management |
| Power supply | Input AC: 176265V, 4763Hz Input DC: -36V-72V |
| Environmental requirements | Operating Temperature:-20°C60°C Storage Temperature:-20°C85°C Relative humidity:5%95%,non-condensing |
Product Overview :
S2610 series Ethernet POE Switch adopts IEEE 802.3az standard with the low-cost application of Ethernet Base-T receiver (100Mb, 1GbE and 10GbE) and low-power idle application by backplane physical layer. When the device is being in the period of low utilization or idle, disconnect the power connection, recover power connection and detect the length of table during the data transmission to reduce the power consumption.
This series switch takes new technology of RTCT, UDLD, Attack Prevention and limit MAC address. It obeys the rules of Restriction of Hazardous Substances and Waste Electrical and Electronic Equipment., also plays a positive role in promoting the energy-saving products.