Conical Flask With Glass Stopper

Conical flask with glass stopper is suitable for testing and analysis of strong corrosive solution which can not be contacted with rubber stopper or can be used for temporary storage of test samples.Its made of borosilicate glass 3.3. Large bottom to stabilize placement, small mouth to reduce volatilization of volatile substances, and is convenient for installing other distillation devices, especially reflux devices.

The characteristics :

1. Small mouth, stable placement, easy cleaning, even tilt oscillation, and the solution is not easy to spill.

2. Instead of conical beaker at titration time.

3.Because of its conical shape and large inclination, the observation of changes in the bottle during laboratory operation is wider and clearer than that in plane observation.

4. Because of the long bottle body, the adhesive area of the solution at the bottle mouth is small, sometimes it can be made simple rough colorimetric use.

5. Can replace culture bottles, such as fecal incubation and bacterial culture bottles in the prevention and treatment of blood sucking.

6. Can replace shaking flasks, mostly with a 500 ml conical flasks, but to choose a solid wall to use.

7. Mostly for the assembly of reflux devices.

Usage:

Before use, the conical flask should be washed and dried, and the substance tested in the flask should be put into the flask for distillation, heating or titration. When titration analysis is carried out, the substance to be measured is put into the bottle, then the indicator is added, titration is carried out with the burette, and the conical flask is shaken continuously during titration. When the indicator in the bottle changes color, titration is stopped and the result is calculated.It is used for compounding reflux distillation unit and widely used in heating, boiling, dissolution, dilution and rough colorimetry of substances. It can also be used as a bottle for culture, fermentation, titration and atmospheric distillation.

Io-dine flask is a horn-shaped flask with grounded mouth and a glass stopper. The upper mouth is horn-shaped, which can be sealed by pouring water or potassium io-dide solution in the experiment, and the stopper is used to prevent the volatilization spillover of the substances in the bottle, so as to make the experiment more accurate.

Usage:
Mainly used for the determination of io-dine value of fat, grease, paraffin, etc.First of all, the sample should be washed and dried, weighed accurately, placed in the io-dine flask, the solvent and io-dine solution (potassium bromide solution) should be carefully added into the flask, the stopper should be tightened and shaken, and then drop several drops of potassium io-dide solution into the wide. Keep in the dark for 30 minutes at 20 - 30℃. and shake constantly so that the measured material (unsaturated substance) and io-dine in the sample can be adequately added. At the end of the experiment, the stopper was opened to make the potassium io-dide solution of the bottle mouth flow into the bottle and shake (without loss). Then the liquid on the bottle stopper and bottle neck was washed into the bottle with 10% potassium io-dide solution of 10 ml and distilled water of 50 ml. With 0.1mol/L sodium thiosulfate solution, the mixture was titrated rapidly and shaken sufficiently to change from dark to yellow. A starch indicator of 1ml to 1% was added to the mixture. When the titration reached the end point, the solution was forced to oscillate until the blue disappeared. At the same time, a blank test, the milliliter of sodium thiosulfate consumed reduce the blank sample consumed and calculate the gram of io-dine consumed by the sample, which is the io-dine value of the sample.

Mouth: standard mouth,wide spout mouth

Volume: 50ml, 100ml,150ml,250ml,500ml,1000ml