Supreme Hakko solder tips for FX-950/FX-951/FX-203 soldering station

Leisto's production compatible soldering tips have good performance such as accurate temperature control, smooth solder wetting performance. The great base copper & precise plating technology improves the thermal conductivity and reduces the temperature recovery time.

Supreme Hakko T12-BC1 soldering tips for FX-950/FX-951/FX-203 soldering station

Features of Hakko T12-BC1 Soldering tips

No.1 Brand new and top quality

No.2 Designed to meet lead-free soldering requirement

No.3 Replacement tips for soldering the different components of PCB

No.4 Good performance in tin-on and tin melting, solder joints uniform, and fluent soldering;

No. 5 with high anti-oxidation, good moist performance, quick thermal conductivity

Advantages of our brand new Hakko T12-BC1 soldering tips

• Designed to meet lead-free soldering requirement

• 100% brand new and high quality with SGS report and pass the ROHS

• Complete models with ex-stock

• Competitive price compares with other manufactures

• Short lead time, ex-stock tips can be sent within 3 days and 15 days for no stock items

• Free sample for testing

Maintenances

• Before welding work

Must first clean wet sponge in water, then squeezed of excess moisture. Only in this way can make the tip to get the best cleaning results. If you use a non-wetting cleaning sponge tip will lead to damage to the tin.




• When welding the welding work in the following sequence allows the tip to get the solder protection and reducing the rate of oxidation







• After welding

First temperature to about 250 ° C, and then clean the tip, coupled with a new layer of tin for protection. (If you use a non-temperature soldering iron, the first power cut off, so that the tip temperature slightly lower after the tin.)

• Try using a low temperature soldering

High temperature will accelerate oxidation, reduce tip life.

• Do not put pressure on too large

When soldering, do not put pressure on too large, otherwise it would damage the tip deformation. As long as the tip can fully contact pads, the heat can be delivered. Also choose the right tip can also help heat.

• Keep the iron head tin

This can reduce the chance oxide tip, so the tip is more durable. After use, the tip temperature should be slightly lower after adding new solder, tin-plated layer to make better oxidation effects.

• Keep the tip clean and immediate clean-oxide

If the head of a black iron oxide, iron head it may not be on the tin, then must be cleaned up immediately. When cleanup first tip temperature to about 250 ° C, and then clean sponge to clean the tip, and then on the tin. Repeated action until the oxide to clean up.

• Selection of low activity flux

Active high or corrosive flux will accelerate corrosion when heated tip, it should be used in low-corrosive flux

• The electric iron on the iron stand

When without the use of electric iron, electric iron should be carefully placed in the appropriate iron shelves, lest tip from impact damage.

• Select the appropriate tip

Select the correct tip size and shape is very important to choose the right tip can work more efficiently and increase the durability of the tip of the degree. Choose the wrong tip soldering iron can affect maximize efficiency, welding quality will therefore be reduced.

Precautions

When you need to replace the tip, select and confirm the original Hakko tip tip models. If you are using non-genuine Hakko tip or tip models do not match, it will affect the performance of the original soldering iron and damaged heater and circuit boards and other components.