aluminium welding machine shanghai

Application

 A machine can be more, the machine will spot welding, continuous precision welding, advanced argon welding (TIG), continuous precision aluminum welding and advanced aluminum welding and other five successful combination of welding

Together. So that welding operations easier and faster. The addition of continuous precision aluminum welding for my company's original function, so that thin aluminum can also achieve precision welding, and heat

The amount of material greatly reduced, the product deformation is small. Simple, fast operation performance enough to exceed the laser welding to meet the needs of a wider range of customers.

Product technical advantages:

First, the use of US imports of high-performance 32-bit ARM processor as the master chip, processing speed up to 72MHZ, current sampling precision, welding time control

Precision, welding process in the current partition switching speed.

Second, the use of imported high-performance MOSFET, temperature up to 150 degrees Celsius, stable performance.

Third, the control part of the whole patch technology, automatic placement machine placement, accurate, to ensure product stability and quality.

Product function parameters:

1, spot welding mode: a variety of welding parameters adjustable, intake time (0.1S-2S), current rise time (0-30%), welding current (1-200A)

Welding time (1-500MS), current drop time (0-40%) and extension time (1-20S).

Second, continuous precision welding mode: relative to the spot welding mode more time interval adjustment (0.1-2S).

Third, the high-grade argon welding mode: in the continuous precision welding mode will be adjusted to 0 interval time.

Fourth, continuous precision aluminum welding mode: in the continuous precision welding mode to increase the cleaning current (1-200A) and cleaning time (10-90%).

Specific regulation introduced:

First, the intake time (0.1-2S) welding advance intake control, effective emptying the air to be welded parts, to ensure stable starting arc and suppression of the first arc from the arc

phenomenon.

Second, the current rise time (0-30%) adjustment can effectively improve the arc pits.

Third, the welding current (1-200A), arc current can be adjusted, respectively, welding or repair different parts.

Fourth, the welding time (1-500MS), adjust the parameters can be accurately adjusted after the arc melting metal time to ensure precision welding, precise control of heat

Into the amount, greatly reduce the amount of product deformation.

First, the interval time (0.1-2S) continuous precision welding, continuous welding pulse pause time, greatly improving the precision welding efficiency; adjusted to 0 for the senior

Argon welding mode, the current control precision, discharge arc concentration, completely beyond the general TIG.

Second, clean up the current (1-200A), the original function, aluminum welding process needs to clean up the surface oxide film, conventional aluminum welding machine cleaning current and welding current is

The same size, cleaning effect is good when the tungsten burning serious; Division I can individually adjust the cleaning current, both to ensure the effect of cleaning aluminum surface oxide film,

But also greatly reduces the tungsten burning, especially in the small current welding without grinding tungsten often.

Third, the cleaning time (10-90%), aluminum welding process to adjust this parameter can clean the aluminum surface of the oxide film to ensure reliable welding.

Fourth, the current drop time (0-40), adjust the parameters can be effectively improved at the end of welding to produce pits.

5, the extension time (1-20S), after the end of welding to protect the gas, can effectively protect the solder joints will not oxidize black.

Welding Range:

Plastic mold stamping die die casting mold glass mold blow mold rubber mold copper alloy die aluminum mold

Welding range.

All kinds of metal parts of the sliding edge of the narrow hole nail hole groove stomatal repair welding machine after welding die defects (such as surface bump, porosity, etc.) welding discharge

Processing, nitriding and soft nitriding after the mold.