Deep Sea Electronics PLC Integral CAN interface to connect to the industry standard CAN 'Eco-friendly'engine management systems providing engine protection and instrumentation without requiring additional senders. Advanced communications port allowing up to 16 generators to load share (kW / kVAr) with Dead Bus control, starting and stopping independent sets in the system according to load demand, balancing engine hours across multiple sets and much more. Full Power monitoring instrumentation and powerful auto-sync functions as standard. The inclusion of auto sync allows the OEM to offer the choice of synchronising, load sharing, soft ramping transfers to and from the genset etc. Simply use the 5510 with it's built in governor and AVR control functions (Requires connection to a suitable electronic governor and AVR) Integral mains decoupling function including ROCOF/vector shift for mains parallel applications Remote communication via RS232 or RS485 port (specify on ordering).RS232 provides Modem link to PC via either PSTN line or GSM network (using a suitable modem). The module can also signal Engineers via their cell phones using the GSM SMS messaging system to advise of system alarms.RS485 provides a 'Modbus' interface. Using industry standard communication protocol allows full system integration into new and existing building management and control schemes. PIN number protected front panel programming of selected trip points and timers, allows field changes to be made to the module settings. Comprehensive PC configuration and status monitoring using the 55xx PC software. Clear engine diagnostic information removes the need for both service equipment and cryptic diagnostic lamp (when used in conjunction with CAN engines. MTU, Volvo, Perkins, Scania, John Deere, Iveco, Detroit, Cummins. Contact us for further details) Built in exercise timer, that can be set for weekly or monthly intervals. LCD 4-line text based display to provide 'at-a-glance' diagnosis of fault conditions, instrumentation and operating state.Dimensions: 240mm x 172mm x 57mm Panel Cutout: 220mm x 160mm ( 8.7" x 6.3")Dimensions: 240mm x 172mm x 57mm Panel Cutout: 220mm x 160mm ( 8.7" x 6.3")
Deep Sea Electronics PLC Can connect to 'Eco friendly' engine management systems of electronic engines providing engine protection and instrumentation without requiring additional senders. Comprehensive remote communication via optional RS232 port. Provides RS232 Modem link to PC via either PSTN line or GSM network (using a suitable modem). The module can also signal Engineers via their cell phones using the GSM SMS messaging system to advise of system alarms. Optional RS485 'Modbus' output. Using industry standard communication protocol allows full system integration into new and existing building management and control schemes. Engine diagnostic information removes the need for both service equipment and cryptic diagnostic lamp (when used in conjunction with electronic engines) .LCD 4-line text based display to provide 'at-a-glance' diagnosis of fault conditions, instrumentation and operating state. Comprehensive PC configuration and status monitoring using 5xxx PC software. PIN number protected front panel programming of selected trip points and timers, allows field changes to be made to the module settings. The Model DSE5320 is an Automatic Mains Failure Control Module. The module is used to monitor a mains supply and automatically start a standby generator set. The module also provides indication of operational status and fault conditions, automatically shutting down the genset and indicating failures by means of an LCD display, and appropriate flashing LED on the front panel. Selected timers and alarms can be altered by the customer from the front panel. Alterations to the system are made using the 810 interface and a PC. This interface also provides real time diagnostic facilities.It is also possible to monitor the operation of the system either locally or remotely.Dimensions: 240mm x 172mm x 57mm Panel Cutout: 220mm x 160mm ( 8.7" x 6.3")Dimensions: 240mm x 172mm x 57mm Panel Cutout: 220mm x 160mm ( 8.7" x 6.3")
