Double Suction Split Casing Centrifugal Pump Horizontal Engine Driven Water Pump

Water supply and Drainage Double Suction Centrifugal Pump In Iron metallurgy Enterprise

Application: 

a. Split case double suction horizontal pump is suitable for mine.

b. Suitable for transporting pure water or liquids with physical and chemical properties similar to water.

c. Suitable for agriculture irrigation.

d. Suitable for water supply and drainage in factory.

e. Suitable for power station.

Advantages:

1. Bearing spacing between both ends is short, pump running stable, low vibration noise, and can increases the speed of running properly, to adapt to a wider range of performance.

2. Inlet and outlet at the same line, so that the pipeline layout is simple and convenient, beautiful. 3. The rotation of the same rotor can be reversed, reducing the risk of damage caused by the water hammer.

4. Unique design of high temperature, use of intermediate support, thick body, sealed cooling, bearing lubrication, so that the pump can run up to 200 ºC occasions, especially for heating network requirements.

5. Pump can be vertical or horizontal installed according to using conditions, seal can be mechanical seal or packing seal.

Model Meaning:

AL NS 800 – 20 M J / A - F

AL: AOlI brand single stage double suction pump

NS: new generation of split casing type

800: inlet diameter (mm)

20: 1/10 of nominal specific speed for impeller

M: impeller type, M-original impeller, N-correcting impeller

J: speed decreased type no mark for standard one

A: first trim of impeller

F: special type, the rotation direction is anti-clockwise (standard type: no mark).

Structure Drawing:

Parameters Data: