Quick heating high temperature induction melting furnace for metals
Specification
Middle frequency power supply |
Type |
MSFC-60/1S |
|
Input voltage |
3N-380V, 50/60Hz (3phases, 4 wires) |
|
Output power |
60KW |
|
Frequency of output |
1KHz |
|
DC Voltage |
500V |
|
DC Current |
120A |
|
Output voltage |
375V |
|
Resonce method |
Series resonance |
|
Cooling water flow |
5T/h |
Scope of supply |
Middle frequency power supply |
|
Stainless steel vacuum smelting cabinet |
|
High vacuum pump unit |
|
Induction coil |
|
Electric control cabinet |
|
Connecting cable |
|
Tungsten rhenium thermocouple |
|
Spare parts |
Description
Main technical parameters for this complete set of equipment:
Middle frequency power supply using condition:
-
Sea level: no less than 4000 meters
-
Ambient temperature: +40 to -2
-
Air relative temperature: less than 80%
-
The equipment shall be installed indoor without conductive dust or errosive gas.
-
Cooling water: 1-2mg/cm²
Application
This complete equipment is used for the smelting and precise casting for copper-based material, Chromium-based material, Cobalt-based material, precise alloy, high temperature alloy as well as magnetic material.
Competitive Advantage
-
Full digital control which can achieve power factor calibration, constent power control, temperature control, frequency tracking, zero power start-up, voltage and current closed-circle control, real-time monitor on over-heat, over-voltage, over-current;
-
Optimum heating current frequency, extending the lifetime of the crucible; Global leading induction heating system, stable & reliable;
-
Precise control of heating energy, meeting the requirements for various heating technologies;
-
Smelting under high power factor, quite low harmnoic interference on the power source;
-
Rapid speed of smelting, no loss of any composition of the noble metal;
-
Reliable monitoring of pressure on water of the system, flow rate and temperature;
-
Safe operation, easy match, convenient adjustment, and wide loading scale.
-
2 watching windows set on the furnace lid is more convenient for watching the inside situation and measure temperature.
-
Quick speed of smelting.
-
Good energy-saving effect.
-
Comfirmity in metal components.
-
Less burning loss.
-
High speed of temperature rising.
-
Easy for temperature control.
- Wide frequency use scope: suitable for 1000Hz to 40000Hz induction heating.
Detailed Image:



