Highway Toll Car Park Barrier Automatic Boom 2.5m IP44 0.6 s

Highway Toll Car Park Barrier Automatic Boom 2.5m IP44 0.6 s

What is the davantages of Wonsun barriers?

1)The humanized clutch device:in case of power off, unlock the clutch device and raise the boom manufally. By the time the power is supplied, lick the clutch device to make it working normally again.

2)Special spring device:Both the compression spring and tension spring can be used in the machine, Using the compression sprin can avoid accidents caused by the tension spring.

3)Three control buttons:for boom raising, falling and pausing.

4)Boom backtrack function:the boom will rise if hits something when falling.

5)Infrared photocell design:for avoiding the crash when the boom falling, so as to prevent the vehicles from being pressed.

6)Both external and internal loop detectors are supported.

7)"open","close" and "stop" controlling interfaces.

8)RS-485 communication serial interface(optional)

9)Traffic light signal connection device: red light for stop,green light for pass.

10)Remote control and wire control for selection.

Wonsun car parking barrier is designed using innovative technology and manufactured with precision

machinery to guarantee satisfaction in quality and reliability for years to come.

Wonsun car parking barrier  has been lab tested for more than 5 millions opening / closing and still without any degrade in performance. 

No limit switch design minimizes mechanical wear and enchances barrier life time.

DZTP-139-D model can use WONSUN 1st generation machine core

DZTP-139-D model also offer a complete range of arm ( folding, fence and swing out )

Each barrier gate will include: 

1 pcs Gate Barrier

1 pcs arm boom (from 1m to 6m can customised)

1 pcs control panel(built inside)

2 pcs remote controllers

1 pcs manual book

1 pair photocell( optional)

1 loop detector( optional)

1 RS485( optional)

Specifications

Communication with customers
 
1)     Q: Connected power and press open/close button but traffic barrier gate no action?

A	Reason	Solution
1	Fuse blown	Check fuse and power in controller
2	Battery of remote control powered off	Change a new one
3	External protection circuit break or at protecting status	Open the barrier door and click OPEN/CLOSE button on control box
You Might Also Like Highway Toll Car Park Barrier Automatic Boom 2.5m IP44 0.6 s Highway Toll Car Park Barrier Automatic Boom 2.5m IP44 0.6 s Related Searches: Automatic Boom Barrier Automatic Barrier Automatic Traffic Barrier Car Park Toy Barrier DVB-S Automatic Car Door Lock Automatic Car Curtain Boom Box Telescopic Boom Show Post Buying Request Contact Supplier Sign In | Join Free About - Feedback -Terms - Privacy - Desktop View Copyright @ HiSupplier.com, All Rights Reserved