| INIDICATOR POWER |
| Power Supply | 90V260V AC 50Hz(or 60Hz)±2% |
| Power Consume | 10W |
| A/D CONVERTER |
| Type | 24-bit Delta-Sigma |
| Analogue input range | 0.02mV to 10mV |
| Linearity | <0.01%FS |
| Gain Drifting | 10PPM/ |
| Minimum Sensitivity | 0.01 µ V/d |
| Conversion Rate | 120/s |
| Display Accuracy | 1 / 30,000 |
| DISPLAY & KEYBOARD |
| Main Display 1 | 6 digits, 7 segments, LED |
| Sub Display 2 | 6 digits, 7 segments, LED |
| Extra Display | 1 digit, 7 segments, LED |
| Keyboard | 4 buttons with beeping feedback |
| Status Indicators | (6 indicator) RUN, SP1, SP2, DISC, ZERO, STAB |
| CALIBRATION & WEIGHING FUNCTIONS |
| Calibration | By test weight or by electronic calibration |
| Digital Filter | Multiple FIR filter with 9 selectable levels |
| Weighing Functions | zero, zero tracking, auto-zero at power |
| ENVIORNMENTAL |
| Operating Temperature | -10 to 40 |
| Storage Temperature | -25 to 70 |
| Relative Humidity | 90% R.H without dew |
| IP Level | Front panel IP 65 |
| LOAD CELLS |
| Excitation | 5V |
| Load Cells | Drives 8pcs Load Cells 350Ω |
| MECHANICAL DATA |
| Dimensions & Weight | 151×105×57 mm (L×W×H) weight approx. 550g |
| Standard Mounting | Panel Mount |
| Certification | CE |
| Enclosure | ABS front panel, cast aluminum body |
| DIGITAL INPUT |
| Input Number | 4 |
| Input Functions for batching mode | (11 Self-defined functions) Start, Stop, Zero, Clear Alarm, Change Recipe, Discharge, Key locker, Pause, Set tare, Clear Tare, Start/Stop |
| Input Functions for packaging mode | (19 Self-defined functions) Start, Stop, Zero, Clear alarm, Change Recipe, Clip/Loose bag, Discharge(Step Signal), Discharge(Pulse signal), Manual fine feed, Key locker, Hi-limit, Low-limit, Gate close, Bag Clipped, Pause, Start/Stop, Clear total, Feeding blocked |
| DIGITAL OUTPUT |
| Output Number | 10 |
| Output Functions for batching mode | (17 Self-defined meanings) Run, Stop, Fast-feeding, Moderate-feeding, Fine-feeding, Material1, Material2 , Material3, Material4, Fixing-value, Discharge, Over/Under, Batch complete, Near-Zero, Pause, Stable, Alarm. |
| Output Functions for packaging mode | (20 Self-defined meanings) Run, Stop, Pause, Fast-Feeding, Moderate-feeding, Fine-feeding, Fixing Value, Over, Under, Alarm, Clip bag, Punching bag, Discharge, Near zero, Supply, Batch complete, Material short, Stable, Feeding blocked, No feeding |
| INSTRUMENT WITH ANALOGUE OUTPUT(OPTIONAL) |
| Type | Isolated 16-bit D/A converter |
| Accuracy | 0.04% |
| Voltage Output | 0-5V / 0-10V / -5-5V / -10-10V |
| Current Output | 4-20mA / 0-20mA / 0-24mA |
| UART RS232/RS485 INTERFACE |
| BUS | Standard Modbus RTU, Standard Modbus ASCII |
| RS | General Measure Protocol |
| PACKING MODE(SELECTABLE) |
| Feeding | 3 Feeding Speed, Jog-feeding supported |
| Working mode | With Bin mode, Without Bin mode |
| Packaging Mode | Gross Packing, Net Packing |
| Recipe | 40 |
| Extra | Free fall self-adjust, Punching bag function |
| BATCHING MODE(SELECTABLE) |
| Material | Support up to 6 materials |
| Feeding | 3 Feeding Speed, Jog-feeding supported |
| Recipe | 40 |
| Extra | Free fall self-adjust, Punching bag function |
| PROCESS SAFETY |
Run resume when re-power on
All parameter Backup & Recovery
Parameter password protection |
