CWDM Models POE Media Converter Fiber For RFID Readers 90mm* 70mm*26mm

10/100/1000 Copper single fiber media converter, network media converter 90mm* 70mm*26mm , UL/cUL, CSA, CE

Features

• Conforms to 10BASE-T, 100BASE-TX, 1000BASE-T, 100BASE-FX* and 1000BASE-X specifications
• MTU size supported 1600 bytes maximum
• Supports pure converter mode data forwarding for extreme low latency
• Built in 128Kb RAM for data buffer
• Supports modified cut-through frame forwarding for low latency
• Optional forward fragments
• 10/100/1000Mbps and full/half duplex automatically configure in TP port
• Supports end fault function (optional)
• MDI/MDI-X Auto Negotiation
• Support EEPROM configuration
• Supports dual fiber and single-fiber 100BASE-FX or 1000BASE-X SFP transceivers for standard or CWDM wavelengths
• FCC Class A & CE approved
• LLR, LFP - Link Loss Return (LLR), Link Failure Pass (LFP) features supported
• RoHs compliant
• 802.3af and 802.3at support
• Stainless steel parts (value added feature)
• Standalone, Wallmount or Hotpluggable in 19' chassis - universal design

Introduction

The PoE Giga-MiniMc are low-cost, compact, multi-port media converters that support both PoE standards. Utilizing their flexibility and compact size, interior private network applications can further benefit from the ever-expanding versatility of the MiniMc product line.

Featuring 10/100/1000Base-T copper UTP ports and one SFP uplink port that supports either a copper or fiber SFP, the PoE Giga-MiniMc are Power Source Equipment (PSE) devices. The PoE Giga-MiniMc is capable of powering up to Powered Devices (PD) over standard CAT5 cable or better, whereas the PoE Giga-MiniMc can power one PD device via a copper port while delivering data over the other copper port.

The PoE Giga-MiniMc is able to power high-power devices such as touch panels, PTZ (pan-tilt-zoom) IP surveillance cameras, and RFID readers that require more power than the typical 15.4 W provided by standard PSE devices such as the PoE Giga- MiniMc.

PoE media converters s are fully compatible with the IEEE 802.3af/at standards to ensure a seamless integration into your network. Enhanced features include store-and-forward, Autocross, an LFPT DIP Switch, and PoE reset on fiber loss of signal. PoE reset is an advanced function that, when enabled, will force the PSE output power to reset when LINK state is lost on the SFP port.

. Expands the Size of an Existing Network

Provides fiber connectivity to Ethernet segments, allowing for even further networking expansion between extended

workgroups. Also provides building-to-building connectivity without the need for the cost and disruption associated with the installation of additional routers.

Enhances the Distance between Networking Devices

Connecting the converter to fiber segments can further extend distances between networking nodes. This can be

achieved by direct connection between the converter anda fiber-based node or networking device.

Specifications

IEEE 802.3 10Base-T twisted pair

IEEE 802.3u 100Base-TX twisted pair

IEEE 802.3ab 1000Base-T twisted pair

IEEE 802.3z 1000Base-LX or SX fiber

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3u Auto-Negotiation

RFC-2474

RFC-2475 DiffServ QoS

Extreme temperature range (DC configuration)

Plug-and-play operation

Accepts RJ45, SC and SFP connectors

50/125µm or 62.5/125µm multi-mode fiber

9/125µm single-mode fiber

Single-strand fiber and CWDM models

Country-specific, high-reliability power adapter

FX and TX Auto Negotiation

AutoCross for MDI/MDIX

MTU: Supports Jumbo Frames up to 10240 bytes

Supports DIN Rail mounting (DIN clips sold separately)

Link Fault Pass Through DIP Switch

Mechanical

Dimensions :90mm* 70mm*26mm

Shipping Weight 1.0 lbs (0.45 kg)

AC Adapter

PoE Giga-MiniMc Input: 100 to 240 ±10% VAC, 50/60H, 0.7A * Output: 48 VDC, 0.62A

* Maximum input power in Watts is calculated by multiplying the input amps by the lowest input voltage.

DC Input Voltage

PoE Giga-MiniMc 45 to 57 VDC on DC terminal block 48 VDC on DC jack

Environmental

Operating Temperature DC Terminal Block: +32° F to +158° F (0° C to +70° C)

Operating Temperature AC Adapter: +32° F to +122° F (0° C to +50° C)

Storage Temperature: -31° F to +167° F (-35° C to +75° C)

Operating Humidity 5% to 95% (non-condensing)

Regulatory Approvals

FCC Class A

UL/cUL, CSA, CE

Application

Order Information

3C-PSE-SFP0101G : 10/100/1000 Copper to 100/1000X Fiber POE Media Converter