Ultrasonic Thickness Gauge NOVOTEST UT-1

Ultrasonic Thickness Gauge NOVOTEST UT-1 is designed for rapid non-destructive thickness testing of:

• products made of various metals, alloys and other materials;

• glass, plastic, composite and other products from non-metallic materials;

• the walls of the tanks, pipes, casing parts, sheets, overhead, and other structures, including the corroded surfaces, pitted, with scum, etc.;

• products during their production and operation;

• metal products for diagnostic and expert work with one-side access to the tested object.

 

Ultrasonic method for measuring thickness
Ultrasonic Thickness Gauge NOVOTEST UT-1 operates on the principle of measuring the propagation time of ultrasound in the product. The pulse generator produces a high frequency electrical pulses that excite the piezoelectric transducer (Probe). At the same transducer are converted electrical signals into the elastic (mechanical) vibrations – sound waves. These waves propagate from the surface of the input to the reflective (bottom)  surface, re-taken and converted into electrical signal by means of PET. After that device calculates the thickness of tested object.

Advantages: 

• Wide range of measuring thicknesses

• Convenience and ease in operation

• Minimum number of controls

• Select the type of probe through single button

• Preset velocity of ultrasound

• Graphical display with backlight

• Compensation of probe delay

• Control of the batteries

• Mapping the presence of acoustic coupling on the graphic display

• Fixation of the last measurement result in the removal of the transducer surface

Specifications: 

Standard set includes: 

• Electronic unit Ultrasonic Thickness Gauge

• Transducer (probe) – 1 pc (depends on the desired range of controlled thickness)

• 2 batteries

• Charger

• Cables

• Operating manual

• Case