316L Smart Electromagnetic Flow Transmitter With Carbon Flange

Divided Type Electromagnetic Flow Meter 
 
 
Introduction:

Actually,the electromagnetic flow meter consists of two parts, transmitter and sensor, the

measuring electrodes inspect the electromotive force, and transmit to the converter, the

converter provides excitation current.

E is usually called a flow signal, after processing the flow signal by converter, output 4~20 mA

pulse(or frequency) signal which is proportional to the flow rate, then the flow rate recording,

adjusting can be achieved

Application
 
MTF electromagnetic flow meter is, a kind of instrument,used for measuring the 

flow conductivity liquid, which is widely used in flow measuring of Metallurgy, 

Chemical industry, Paper industry, Environmental protection, Oil industry, 

Textile industry, Food industry and City administration, Water works,etc.
 
 
Features:
1). It applys “Fuzzy Algorithm” technology to the measurement of electromagnetic flow 
and has the function of artificial intelligence.
2). igh resistance, fast response design can make undistorted collection of weak signal 

and fast response to the flow changes. Its range rate can reach 100:1.
3). It has the function of low conductivity measurement.
4). It has the consistency of converter’s interchange, which can avoid input parameters 

repeatedly.
5).  It has lightning-protection and electricity-protection circuits. The effective, anti-interference

circuits apply to all kinds of bad environment.
6). It is the first domestic company that adopts the function of saving settings before delivery, 

which can avoid the loss of the parameters.
7). Infrared remote control and button operation to make the operation more convenient.
8). Zero correction of sensor and automatic zero adjustment.
9). It has multi-language interface to satisfy all the users’ requirements.
10). It has the function of self-adjustment and self-checking.
 

Selection of Protection Level:

 According to the GB4208-84 IEC standard (IEC529- 76) on the protection level:

 IP65 : waterjet type; it allows the taps spray from all the directions of the instrument. 

 the pressure is 30kPa(0.3bar),th output of the water is 12.5l/m,and the taps is 3 meters far 

 from the instruments.

IP67 : antiimmersion type, it can be submerged in the water in a short time, when 

testing, the highest point in the experiment should be at least 15cm underwater and last for at 

least 30 minutes. 

IP68: Submersible type, it can work in the water for long term, Its maximum depth in the 

water should be consulted by the manufacturer and the user.

Site Picture: