BD-DV40000 series video fiber multiplexer can simultaneously transmit 4 channels broadcast quality video,1-4 channels unidirectional or bidirectional audio,1-4chnnels unidirectional or bidirectional data,one port Ethernet,Telephone and Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease installation and operation. All the electronic and optical interface comply with international standards,customer need not to do any adjustments during installation. LED indicators are provided for instantly monitoring system status. Standalone or rack-mount video fiber multiplexer are available ,which is suitable for different working environment . PRODUCT CHARACTERISTICS 4channels encoded and non-compression broadcast quality video transmission Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocolsSupport any high-resolution video signal Automatic compatible PAL, NTSC and SECAM video system1-4 channels audio (optional)1-4 channels asynchoronus data (optional)1 port 10/100Mbps ethernet (optional)Power supply and other parameter status indication, which can monitor the operation condition of systemSupport no-damage regenerative trunk of videoConstant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .Industry-grade of operating temperature from -40 to 85 degree , which is applied to the different working environmentHot-swap supporttedStand-alone type or card-type installed in 19inch 2U or 4U rack-mount chassis. Technical Specification
Video interface
Video | 4channels |
Video bandwidth | 8 MHz |
Automatic compatible video system | PAL,NTSC,SECAM |
Video input / output impedance | 75 ohm(unbalance) |
Video signal-to-noise ratio | more than 67dB |
Differential gain | (10%-90%APL) DG <1% ( typical value) |
Differential phase | (10%-90%APL) DP <0.7° ( typical value) |
Video connector | BNC |
Fiber-optic Specification | F/O connector: FC/ST/SC TX :Power:-8 ~ -3dBm Sensitivity :less than-35dBmRX:Power:-15 ~ -8dBm Sensitivity :less than-24dBm Transmission Distance :20KM (single mode) Operating Wavelength: TX1310/RX1550nm(Transmitter);TX1550/RX1310nm(Receiver) |
|
Specification of custom-made options |
|
Data | Connector: Terminal BlocksEncoded type : RS485 / RS422 / RS232 / Manchester Data rate : 0 - 400KbpsBER: ≤10-9 |
|
Audio | Connector: Terminal BlocksAudio input / output impedance :600Ω(Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value)Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZAudio digital encoded bandwidth :24bitAudio signal-to-noise ratio: S/N≥95dB (weighted) |
|
Telephone | Connector: RJ11Bandwidth :8KHZ Features:Support call-showing function ;support H-FOperating mode : Point to point hotline mode / FXS-FXO |
|
Ethernet | Connector: RJ45Support mode : Half duplex or Full duplexStandards:IEEE802.3Data rate : 10M / 100MbpsBandwidth: 25M |
|
Dimensions :19.2(L)x17.3(W)x2.8(H) cmOperating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )Operating Temperature: -40 to +85 degreeStoring Temperature : -55 to +85 degreeHumidity: 0 to 95% non-condensingMTBF : more than 105 hoursWarranty : 3 years Application :Intelligent Transportation SystemConnection of Sub-network for Surveillance CenterHighway video monitoring and control systemIndustrial Closed Circuit Television SurveillanceSecurity monitoring and control systemTV program switching channel transmissionOrder Information