Ferritin (Fer) Kit (Immunofluorescence) for medical diagnostic

Ferritin (Fer) Kit (Immunofluorescence) for medical diagnostic

----------------------------------------------------------------------------------------------------

Methodology                                                                                 

Fluorescence Immunoassay                       

--------------------------------------------------------------------------------------------------

Applicable Instruments                                                           

-----------------------------------------------------------------------------------------------

Product Description                                                                  

Package                                                                                           

Test card: Aluminum foil pouch 1pc/bag, desiccant

Package size: 25pcs/box

Principle of the Procedure                                      

The assay is a double-antibody sandwich immunoassay for quantitative determination  of Fer concentration based on immunofluorescence technology. The sample droplets to  be measured were added to the sample well of the detection card. Through chromatography, the sample reacts with the fluorescent latex coated with ferritin  monoclonal antibody I on the conjugated pad. The complex spread forward along the  nitrocellulose membrane captured by the ferritin monoclonal Antibody II, which was  fixed on the test line. The more ferritin there is in the sample, the more complexes are  accumulated on the test line. The intensity of the fluorescent antibody signal reflects the  amount of ferritin captured. The concentration of ferritin in the sample can be  determined by the Immunofluorescence quantitative analysis instrument produced by  the company.

Assay Methods                                                                             

1. Take out the test strip at room temperature(10-30℃), flat on the table;

2.Take out the IC card, put the IC card on inductive position of analyzer,

the system will read the information of standard curve in the card and save 

in the analyzer;

3. Select the curves are consistent with the project and the batch number 

information before testing;

4. Pipe sample in each test strip, wait 15 minutes at the room temperature, and 

then insert into theanalyzer for testing, the instrument automatically calculate

and show  the sample concentration.

Product show            

Accessories required but not provided

1.Immunofluorescence quantitative analyzer(NRM-FI-1000)

2.Reagent strip incubator

3.Fer Control 

Storage and stability

Sealed: The kit must be stored at 10-30℃, valid for 18 months.

Opened: The cartridge must be used within 1 hour once its foil pouch is opened