Place of Origin: | Zhejiang |
---|
Location: | Wuxi, Jiangsu, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Model No.: | JW-300S |
---|
Profile Bending Machine With Mould for Angle Steel, Flat Steel, Round Steel, T Shape Steel And Seamless Steel
1. Specifications:
Type | JW-300S | ||
Max section modulus of elasticity(cm3) | 700 | ||
Profile yield limit | ss£245MPa | ||
Angle iron incurvature | Max section | 200x200x20 | |
Min bending dia. | 4200 | ||
Min section | 75x75x10 | ||
Min bending dia. | 1600 | ||
Angle iron excurvature | Max section | 200x200x24 | |
Min bending dia. | 4200 | ||
Min section | 75x75x10 | ||
Min bending dia. | 1000 | ||
Channel steel excurvature | model | 40 | |
Min bending dia. | 4000 | ||
Channel iron incurvature | model | 40 | |
Min bending dia. | 4000 | ||
Flat iron bend in hard way | Max section | 250x70 | |
Min bending dia. | 4800 | ||
Flat iron bend in easy way | Max section | 500x75 | |
Min bending dia. | 4800 | ||
Round steel | Max section | 170 | |
Min bending dia. | 1800 | ||
Pipe | Max section | 300x10 | |
Min bending dia. | 5000 | ||
Diameter of standard module (mm) | 800 | ||
Dia of main shaft | 320mm | ||
Rolling speed(m/min) | 3 | ||
Down roller elevating speed | 180-200mm/min | ||
Work pressure of hydraulic system | 16Mpa | ||
Main motor power(KW) | 30 |
2. Description:
Rolling process
This machine has many types of craftwork, first bend two heads of work piece then rolling, or leave bending allowance, bending then pre-bending, or pre-bend one head, then pre-bend another. Final user can choose according to actual need, the following is just a reference:
a. Put flat steel or pipe into mould channel ,make left down roller mould touch the work piece and upper roller mould clamp the pipe.
b. Right down roller mould rise up slowly to start bending, pre-bend between upper roller moulds and left down roller mould to get needed diameter, check with sample. In this process, clamp the edge of pipe to reduce leaving straight plate and get better pre-bending.
c. Left roller mould gets down while right down roller mould raise up, take the work piece to left side , pre-bend another head between upper roller mould and right down roller mould.
d. Adjust two down roller moulds to same horizontal position, bend for several times (usually 3-5times) to needed diameter.
e. Cut off leaving straight work piece, continue bending or solve deformation and seam jointing , then check the round.
Mould
Through forge—anneal—machining –hardening and tempering—flaw detection—finish machining –quench—grinding.
This mould has good rigidity, wear resistance and long life, which is very suitable for high load work.
What is more, we can provide mould for angle steel, flat steel, round steel, T shape steel and seamless steel according to the customer’s requirement.