4 X 8 Galvanized Steel Sheet ASTM A653 Rust Resistance for Structure

4 X 8 Galvanized Steel Sheet ASTM A653 Rust Resistance for Structure

Quick Details

• 1. Product name:Galvanized steel sheet
• 2. Standard Size: 1000mm x 2000mm 1250 x 2500mm
• 3. Thickness 0.13 - 3.0mm
• 4. Zinc Coating: 40 - 275g/m2
• 5. Regular Spangle / Zero Spangle

More Informations of our products
 

 
 
Features & Properties:
 

A Hot Dip Galvanized coating is relatively easier and cheaper to specify than an organic paint coating of equivalent corrosion protection performance. The British, European and International standard for Hot Dip Galvanizing is BS EN ISO 1461 which specifies a minimum coating thickness to be applied to steel in relation to the steels section thickness e.g. a steel fabrication with a section size thicker than 6 mm shall have a minimum galvanized coating thickness of 85 μm.

Further performance and design information for galvanizing can be found in BS EN ISO 14713-1 and BS EN ISO 14713-2. The durability performance of a galvanized coating depends solely on the corrosion rate of the environment in which it is placed. Corrosion rates for different environments can be found in BS EN ISO 14713-1 where typical corrosion rates are given with a description of the environment in which the steel would be used.

Process of Galvanized Steel Sheets

A typical hot-dip galvanizing line operates as follows

• Steel is cleaned using a caustic solution. This removes oil/grease, dirt, and paint.
• The caustic cleaning solution is rinsed off.
• The steel is pickled in an acidic solution to remove mile scale
• The pickling solution is rinsed off.
• A flux. often is applied to the steel to inhibit oxidation of the cleaned surface upon exposure to air. The flux is allowed to dry on the steel and aids in the process of the liquid zinc wetting and adhering to the steel.
• The steel is dipped into the molten zinc bath and held there until the temperature of the steel equilibrates with that of the bath.
• The steel is cooled in a quench tank to reduce its temperature and inhibit undesirable reactions of the newly formed coating with the atmosphere.