Full-automatic Fresh Corn Processing Line

Independent Machines of Full-automatic Fresh Corn Processing Line and Their Features  

1.Metering conveying equipment (if distributed with the whole line is decided by the customer): it is to control the corncob conveying rate precisely with automatic-electrodeless speed regulation.
2.Vibrating feed devise: it is to sort the scattered corncobs to get the highest shelling efficiency and the lowest corn grains damage rate.
3.Steam withering machine with vibration and high-pressure: it is mainly to process the thick and solid corncobs that are not easy to shell, by softening the corn bract with steam to improve shelling rate.
4.Automatic sheller machine: it is the master part of the line, and its rubber roller which is made of rubber, silica-gel, and PU, etc. food-grade materials and has properties of safety, sanitation, high efficiency and long service life, can strip corncobs effectively without damaging corn grains, because processors can adjust the bearing rotating speed and the incline angle of the rubber roller to control the shelling and damaging rates.
5.High-pressure cleaning machine: it is used to cleaning the corn grains after threshing, and high-pressure cleaning method ensures the good rinsing and sterilizing effect.
6.Corn stem cutting machine: it is used to cut corn stem for better corn threshing.
7.Corn grains cutting machine: it is for fresh corn threshing with fixed direction & separation conveying, and high cutting rate.
8.Lubrication system: 4-8 roller beds have multiple lubrication points. To avoid polluting the processed corns, the bearing support is lubricated with high-grade lube or white oil for food machinery. And the lube enters the oil filler hole by the oil pump. Every 1-2 hours' work, there is a 5-second automatic lube-supplement.
9.Electronic control system: it is safe to handle, because the electric cabinet is made of stainless steel plate, and it has 7 pairs of individual control buttons, low-pressure control, safety factor setting, overload and short circuit protection, and the design based on electricity operation standards.
10.Safety protective cover: it is the grid welded with stainless steel pipes, installed up the rubber roller and by the discharge gate to protect operators, and also the grid can be raised to manage general stoppages.