Wave depth 19mm cooling tower fill cooling tower fill media

Wave depth 19mm cooling tower fill, cooling tower fill media

Introduction of Wave depth 19mm cooling tower fill, cooling tower fill media

Cooling towers reject heat from water-cooled systems to the atmosphere. Hot water from the 

system enters the cooling tower and is distributed over the fill (heat transfer surface). 

Air is induced or forced through the fill, causing a small portion of the water to evaporate. 

This evaporation removes heat from the remaining water, which is collected in the cold water 

basin and returned to the system to absorb more heat. Each cooling tower line, although operating 

under the same basic principle of operation, is arranged a little differently.

There are two main configurations of factory assembled cooling towers: cross-flow and counter-flow. 

In cross-flow cooling towers, the water flows vertically down the fill as air flows horizontally across. 

In counter-flow cooling towers, the water flows vertically down the fill as air flows vertically up.

 Cooling Tower Filler Specifications

1. Size: Width: 915mm, 1220mm, 1520mm, etc. 

             Length: As your request.

             Common size: 915*1854mm, 915*2260mm, 915*2970mm, 1220*1854mm,

                                     1220*2260mm, 1220*2970mm, etc.

2. Material: PVC/PP

3. Thickness: 0.2~0.4mm.

4. Applicable Temperature: 65°C~-35°C.

5. Color: Black, Grey, etc.

6. Shaping mode: compression molding.

7. Minimum order quantity: 500pcs.

8. Packaging: In bundle, wooden pallet or as your request.