Hypertherm Shield Plasma Cutting Accessories For PowerMax125 Plasma System

Hypertherm Shield 220976 For PowerMax125 Plasma System Machine Plasma Consumables

          We can offer you all plasma consumables for hyptertherm, Kjellberg, Esab, Koike, Komatsu, Thermadyne, such as: electrode, nozzle, shield, swirl ring, inner cap, retaining cap, water tube, torch body and so on.

1. HEC Brand

We make metal cutting system and plasma cutter as well as torch and consumables. We make plasma cutting machine and fiber laser cutting machine with high quality and reliablity.

2. Cut Performance

HEC plasma consumables use high quality material and standard process to make sure the highest quality. Our consumables cutting performance is as the same as orginial OEM manufactory.

3. Good Price

HEC plasma consumables are good quality with low price make customers best requirement and saving money.

4. Big Catagory

HEC sell all kinds of plasma consumables include Hypertherm, EASB, Kjellberg, Koike and also supply some torch.

Technical Support:

Plasma cutting technology

4, setting current

The current is set to 95% of the maximum current through the nozzle. (the higher the current, the greater the hole of the nozzle). The current is too low to produce "soft arc" and cold cut. High current is consumed by nozzle.

5, select the appropriate plasma gas

If the system can use a variety of or two kinds of plasma gas, according to the material and cutting thickness of the use of a most suitable gas. (see gas selection table) and confirm whether the gas pressure and flow are correct or not.

6, select the appropriate two gas

(see gas selection table) and confirm whether the pressure and flow of gas / water are correct.

7 cutting torch and workpiece perpendicular to

If the cutting torch and the material is not vertical, will cut out the angled slot. From the two aspects to check if the torch and workpiece angle of 90 degrees.