Hypertherm Retaining Cap 220313 For Hypertherm HPR130 Plasma Machine Torch Parts
Hypertherm plasma Cutting machine HPR130, HPR260, plasma consumables. Hypertherm plasma HPR260 plasma cutting accessories, Hypertherm HPR130 plasma torch parts, hyperherm plasma cutter nozzle 220182, plasma cutting nozzle 220188, hyperherm electrode 220181, plasma cutter tips 220187, hyperherm shield 220183, hyperherm cutting shield 220189, hyperherm swirl ring 2200179, Plasma cutter swirl ring 220553. plasma cutter water tube 220340. plasma inner cap 220176, plasma retaining cap 220173, plasma cutter parts 220552.
Customer Satisfaction
If you worry about our products’ quality, I can give you some samples to test by free. Please don't hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
| Machine | HEC NO. | Ref NO. | Description |
HPR 130
HPR 260
HPR 130XD
HPR 260XD
HPR 400XD | H03192 | 220192 | Electrode,30Amp |
| H03552 | 220552 | Electrode,50Amp |
| H03187 | 220187 | Electrode,80Amp |
| H03181 | 220181 | Electrode,130Amp |
| H03352 | 220352 | Electrode,200Amp |
| H03435 | 220435 | Electrode,260Amp |
| H03649 | 220649 | Electrode,130Amp Bevel |
| H03541 | 220541 | Electrode,260Amp Bevel |
| H03665 | 220665 | Electrode,130Amp(silver Plus) |
| H03666 | 220666 | Electrode,200Amp(silver Plus) |
| H03668 | 220668 | Electrode,260Amp(silver Plus) |
| H03629 | 220629 | Electrode,400Amp |
| H73180 | 220180 | Swirl Ring,30Amp |
| H73553 | 220553 | Swirl Ring,50Amp |
| H73353 | 220353 | Swirl Ring,200Amp |
| H73179 | 220179 | Swirl Ring,80/130/260Amp(Bevel) |
| H73436 | 220436 | Swirl Ring,260/260Amp(Bevel) |
| H73631 | 220631 | Swirl Ring,400/400Amp(Bevel) |
| H13193 | 220193 | Nozzle,30Amp |
| H13554 | 220554 | Nozzle,50Amp |
| H13188 | 220188 | Nozzle,80Amp |
| H13182 | 220182 | Nozzle,130Amp |
| H13354 | 220354 | Nozzle,200Amp |
| H13439 | 220439 | Nozzle,260Amp |
| H13646 | 220646 | Nozzle,130Amp(Bevel) |
| H13542 | 220542 | Nozzle,260Amp(Bevel) |
| H13632 | 220632 | Nozzle,400/400Amp(Bevel) |
| H33754 | 220754 | Retaining Cap 30/50Amp |
| H33176 | 220176 | Retaining Cap 80/130Amp |
| H33355 | 220355 | Retaining Cap 200Amp |
| H33433 | 220433 | Retaining Cap 260Amp |
| H33603 | 220603 | Retaining Cap (Bevel) 130/260Amp |
| H33756 | 220756 | Retaining Cap 80/130Amp |
| H33757 | 220757 | Retaining Cap 200Amp |
| H33760 | 220760 | Retaining Cap 260Amp |
| H33635 | 220635 | Retaining Cap 400/400Amp(Bevel) |
| H33740 | 220740 | Retaining Cap (Bevel) 130/260Amp |
| H23194 | 220194 | Shield,30Amp |
| H23555 | 220555 | Shield,50Amp |
| H23189 | 220189 | Shield,80Amp |
| H23183 | 220183 | Shield,130Amp |
| H23356 | 220356 | Shield,200Amp |
| H23440 | 220440 | Shield,260Amp |
| H23645 | 220645 | Shield,130Amp(Bevel) |
| H23545 | 220545 | Shield,260Amp(Bevel) |
| H23761 | 220761 | Shield,200Amp |
| H23764 | 220764 | Shield,260Amp |
| H23636 | 220636 | Shield,400/400Amp(Bevel) |
| H23742 | 220742 | Shield,130Amp(Bevel) |
| H23741 | 220741 | Shield,260Amp(Bevel) |
| H43173 | 220173 | Retaining Cap 30/50/80/130Amp |
| H43398 | 220398 | Retaining Cap 200/260/(Bevel)130/260Amp |
| H43747 | 220747 | Retaining Cap 30/50/80/130Amp |
| H43637 | 220637 | Retaining Cap 200/260/400Amp(Bevel) |
| H83818 | 128818 | HPR torch assembly |
| H83162 | 220162 | Quick-disconnect torch |
| H83163 | 220163 | Quick-disconnect recepticle |
| H83706 | 220706 | Quick-disconnect torch |
| H83705 | 220705 | Quick-disconnect recepticle |
| H93571 | 220571 | Water Tube with O-Ring |
| H93340 | 220340 | Water Tube with O-Ring(30/50/80/130/200/260Amp) |
| H93700 | 220700 | Bevel water tube(mild steel-130A) |
Technical Support:
The maintenance of the plasma torch
1. to correctly install the torch
Correctly and carefully install the torch, and to ensure that all the parts fit together well, and ensures the cutting gas and shielding gas flow, before the installation will be all the components on a clean cloth, avoid dirt adhesion to components. In the "O" type ring with a little lubricant, "O" - shaped ring is appropriate, should not be more.
2. the wearing parts should be replaced in time before the complete damage.
Vulnerable parts are not used completely damaged after the replacement of, because of serious damage to the electrode, the nozzle and the eddy current ring will can not control the plasma arc, cutting torch damage easily. So for the first time found that the quality of cutting down, it should be timely inspection and replacement of wearing parts.
3. The connecting thread cleaning torch
In the replacement of wearing parts or daily maintenance inspection, must ensure that the torch of internal and external thread cleaning. If necessary, apply more than 98% of industrial alcohol cleaning or repair connection thread.
4 the contact surface of the cleaning electrode and the nozzle
Must ensure that the nozzle and electrode contact surface clean and free of oil, if the contact surface with dirt, the torch will not be able to normal working, should use such as hydrogen peroxide cleaning agent cleaning.
5 check cutting gas and protective gas
Check the flow and pressure of cutting gas and protecting gas every day, if the flow is not sufficient or leakage, should immediately stop the trouble.
6 avoid torch collision damage
In order to avoid cutting collision damage, should be properly programmed, the cutting speed limit to avoid walking. Install anti-collision device can effectively avoid the collision damage the cutting torch.
7. The damage reason of the most common torch
(1) the torch collision
(2) the destructive plasma arc due to the damage of the damaged parts
(3) plasma arc damage caused by the dirt
8. matters needing attention
(1) do not grease the cutting torch
(2) don't over use the "O - ring" lubricant.
(3) the protective cover is installed in the torch on the splash do not spray chemicals.
(4) do not take manual torch when use hammer.
