220433 HPR260 Hypertherm HPR130 Consumables / Hypertherm Inner Cap

Hypertherm Inner Cap 220433 HPR260 For Hypertherm Plasma Machine Consumables
 
Plasma Consumables, Plasma Torch Consumables, Plasma Cutter Consumables, Plasma Cutting Consumables, Hypertherm Plasma Parts, Hypertherm Consumables, Hypertherm Plasma Consumables, Hypertherm Torch Consumables, Hypertherm Machine Consumables, Hypertherm Plasma Consumables, Hypertherm Plasma Machine Consumables, Hypertherm Plasma Cutting Consumables, Hypertherm Parts, Hypertherm Plasma Parts, Hypertherm Torch Parts, Hypertherm Machine Parts, Hypertherm Plasma Parts, Hypertherm Plasma Machine Parts, Hypertherm Plasma Cutting Parts,
 
We are a professional manufacturer of plasma cutter consumables, Our company is located in the Shanghai City, China ,it was established in 2007,but we had 10 years manufacturing experience in this field, the new factory covers an area of more than 10000 square meters .There are 50-100 workers and 20 research engineers.

 

 


 
 
Technical Support:
The maintenance of the plasma torch
 
1. to correctly install the torch
 
Correctly and carefully install the torch, and to ensure that all the parts fit together well, and ensures the cutting gas and shielding gas flow, before the installation will be all the components on a clean cloth, avoid dirt adhesion to components. In the "O" type ring with a little lubricant, "O" - shaped ring is appropriate, should not be more.
 
2. the wearing parts should be replaced in time before the complete damage.
 
Vulnerable parts are not used completely damaged after the replacement of, because of serious damage to the electrode, the nozzle and the eddy current ring will can not control the plasma arc, cutting torch damage easily. So for the first time found that the quality of cutting down, it should be timely inspection and replacement of wearing parts.
 
3. The connecting thread cleaning torch
 
In the replacement of wearing parts or daily maintenance inspection, must ensure that the torch of internal and external thread cleaning. If necessary, apply more than 98% of industrial alcohol cleaning or repair connection thread.
 
4 the contact surface of the cleaning electrode and the nozzle
 
Must ensure that the nozzle and electrode contact surface clean and free of oil, if the contact surface with dirt, the torch will not be able to normal working, should use such as hydrogen peroxide cleaning agent cleaning.
 
5 check cutting gas and protective gas
 
Check the flow and pressure of cutting gas and protecting gas every day, if the flow is not sufficient or leakage, should immediately stop the trouble.