SAE 45 deg FLARE

Typical Application:

LP and natural gas, flammable liquids (special order), instrumentation, refrigeration, power steering, hydraulic and pneumatic systems.

Pressure:

Working pressure up to 2000 psi depending on tube size. Will withstand burst pressure of standard tubing - up to 5000 psi with bundy-weld (double flared) and 3500 psi with copper tubing, depending on size.

Vibration:

Good resistance - use long nut when greater vibration resistance is required.

Temperature Range:

-65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.

Material:

CA 360 Brass for Barstock fittings.,CA377 Brass for forged fittings

Used With:

Copper, brass, aluminum and steel hydraulic tubing that can be flared. See pages 22-26 for material compatibility.

Advantages:

Low cost and reusability, long or short nut. Good resistance to vibration

	CATALOG	FEM. PIPE	MALE PIPE
	NUMBER	THREAD	THREAD
	49×2A	1/8	1/8
	49×3A	3/16	1/8
	49×4A	1/4	1/8
	49×4B	1/4	1/4
	49×4C	1/4	3/8
	49×5A	5/16	1/8
	49×5B	5/16	1/4
	49×6A	3/8	1/8
	49×6B	3/8	1/4
	49×6C	3/8	3/8
	49×6D	3/8	1/2
	49×8B	1/2	1/4
	49×8C	1/2	3/8
	49×8D	1/2	1/2
	49×10C	5/8	3/8
	49×10D	5/8	1/2
	49×12D	3/4	1/2
	48×12E	3/4	3/4