600W Solar Inverter Grid Tie Micro Inverter

600W Solar Inverter Grid tie Micro Inverterdirectly connected to the solar panels (do not need to connect the battery)Using precise MPPT function,Website:http://www.sunnysamsolar.com, APL functions, the inverter automatically adjust the solar panels of maximum output power,simply connect the solar panel to the grid inverters. Do not need to connect the battery. AC 0 angle with high precision auto-detectionAC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.Synchronous High-frequency ModulationIn the process of the grid, usually adapt the same phase angle in parallel. (ie, When the two-phase alternating current total is equal to 0.Use switch to combination the two AC fusion) and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.Pure Sine Wave OutputUse SPWM directly to make pure sine wave output.Automatic Sensing Function Solar LuminosityUse the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Used more convenient.Power Automatically Locked (APL)In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable.Maximum Power Point Tracking (MPPT)Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the  maximum output point, then achieve a stable output purposes.Automatically Adapt To Different Load Power Factor Adapt to any of the power load.Constant Current, Constant PowerThis product is constant current, constant output power, without any overload, over-current phenomenon.Automatically Shut Down When The Power Output Of a FaultWhen the city power system is in failure, the inverter will automatically turn off the output.Current Limit ProtectionCurrent limit Stack Multiple MachinesMultiple small power inverters in parallel can achieve large output power.High-Frequency High Conversion RateAdapt high frequency converter, the output more efficient.Parameter TableGrid-series models200W300W400W500W600W800W1000WRecommend use solar panels320Wp420Wp520Wp620Wp720Wp1050Wp1250WpDC Maximum Input Power300W400W500W600W700W900W1200WDC maximum voltageVpvDC30.2VDCDC voltage rangeVpv 10.5V~28VDCMaximum output power factor99%Maximum input current15A20A25A30A40A45A65AAC output power200W300W400W500W600W800W1000WAC maximum output power200W300W400W500W600W1000WAnti-voltage protectionFuseAC standard voltage range90V-140/180~260VACAC frequency range55Hz~63Hz/ 45Hz-53HzOutput current totalTHDIAC<5%harmonic distortionPhase<1%Islanding protectionVAC;f ACOutput short circuit protectionCurrent-limitingShowLEDStandby Power<2WNight Power<1WAmbient temperature range-25 °C~60°CHumidity0~99%(Indoor Type Design)WaterproofIndoor Type DesignElectromagnetic CompatibilityEN50081.part1   EN50082.part1Power System DisturbanceEN61000-3-2  EN60950-1Network testDIN VDE 1026User Guiding:1  Installation Connection(1) Red terminal: Connect DC positive, black terminal: Connect DC negative. Show in Figure 1.Figure 1(2) AC socket: Connect to the mains. Put the side of the AC cord which has holes into the inverter with 3 foot outlet and the other side of the AC cord to home 3PIN AC outlet.  Show in Figure 2.Figure 2                                     Figure 3(3) Switch: Connect the connections in right way, then turn on the switch. The inverter starts to work.2 Grid tied inverter used in the wind and solar street lights.Use this product, do not need to add solar panel controller, battery.Connection Method 1 (Figure 4 below):                Connection method 2 (Figure 5 below):Connection Method 1: Wind energy, solar energy can supply to the grid at the same time, then achieve the highest efficiency. First consider this connection method. Figure 5Connection method 2: Use a large power generation capacity first. The other capacity is in added. Wind and solar capacity complement each other with moderate efficiency.3 Stack using In order to achieve higher power use requirements, this product can be stacked, such as: 4 grid inverter1000W stacking can achieve 4000W.And the number of the stacking is unlimited. Used as shown in Figure 6:4 Input and output(1) DC input limitInput voltage range: 10.5V to 28VSolar Panel: Recommend using the power more than 30W and the standard voltage  of 17.5V PV panels.Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter.Wind turbine system: Rated voltage 24VDC, maximum voltage 28VDC.(2) AC output:Voltage range of the inverter whose output is 220V AC.: 170V - 260VVoltage range of the inverter whose output is 110V AV.: 90V - 160V5 LED Indicator:(1) Red LED: 1,Low-voltage protection (input DC voltage is less than 10.5VDC).2,Over-voltage protection (Input DC voltage is greater than 28.5VDC).3,Over-temperature protection (when the chassis temperature is above 75°C, the temperature dropped about 2-10 minutes to restart automatically after cooling).4,Fault Protection (when 110VAC or 220VAC power outage or shutdown).5,Islanding protection: When the electric supply stop, the inverter automatically shut down output.(2) Green LED: 1,Green LED flashing: The inverter is adjusting power output. MPPT is in working condition.2,Green LED long in time: The inverter is in working condition with the maximum output power.Notes               ---Please pay attention of the voltage when use the product. The voltage is from 10.5—28V, if is not these voltage the product may broken.---Non-professionals do not disassemble. Only qualified personnel may repair this product.---Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials.---When using this product, avoid children touching, playing, to avoid electric shock.---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the cable size. ---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear.---Connected to a power outlet to provide AC.---Connected solar panels, battery or wind generators DC input DC power supply cable.---Proposed wind power plant with its own charge controller and load dump.Accessories for productOne standard AC wire, one warranty card, one user manual and one certificate of quality.