380V 50Hz Sizing Yarn Sizing Process Machine With Single Slurry

380V 50Hz Sizing Yarn Sizing Process Machine With Single Slurry

Appropriate technology

This machine adopts the full-width flake-like dyeing method; after finishing the warping, the warp will boiled, dyed, starched and baked by the machine, and then be rolled by the weaver's beam and provided for the next process for weaving.

Main parameters of equipment

Width of the dyeing sizer

Rear part: 1800, 2000mm (creel, dying areas, yarn-storage and dyeing)

Headstock of the sizing machine: 2200mm(coiled pipe 2800mm, Max.)

                                                    2400mm(coiled pipe 3200mm, Max.)

Running speed of dying-sizing range

Rear part: 5-35m/min(creel, dying areas and dying drying chanber)

Front part: 5-45m/min(plasm trough, sizing-yarn drying chamber and headstock)

Creel disc diameter: phi1000mm(Max)

Beam s=disc diameter: phi110-phi1000mm

Steam pressure: >0.3Mpa

Transmission model: mutual-unit and variable-frequency synchronous transmission

Working voltage: AC380V, 50HZ

Power of complete equipment: 110KW(15dye vats)

Pressure of pressed air: >0.5Mpa

Yarn-restored capacity on yarn-restored frame: 90m

White warp storage rack and drive

The driving padder can efficiently control the respective tension of warp and dyeingarea, improve the pre-treatment and dyeing effect. With the white warping yarn-storing frame, the yarn and dyeing can not be needed and which can save plenty of production cost.