60Mn Iron Grinding Balls 20mm - 150mm
| Place of Origin: | Shandong |
|---|
Company Profile
| Location: | Jinan, Shandong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | B2 60MN 65MN 45# |
|---|
Product Description
SHANDONG High quality Iron Grinding Balls 20mm to 150mm made of 60Mn
Feature of our grinding balls as follows:
1)Hardness
Surface Hardness of forged ball ranges from HRC55 to HRC67.
Core Hardness of forged ball ranges from HRC50 to HRC55.
Average Volume Hardness (AVH) ranges from HRC55 to HRC63.
All requirements about hardness can be customized according to different grinding condition.
2)Density
Average Density is 7.85g/cm3. Consistency is higher than ordinary ones.
3)Component Analysis
Raw material is High Carbon Alloy Steel, and the promotion of alloy elements is under 5%.
4)Impact Value
Impact Toughness Value is more than 12J/cm2
5)Metallographic Structure
Tempered martensite forms when tempered. The best microstructure is fine needle martensite.
6)Breakage Rate
Actual breakage rate is not greater than 0.5% and close to 0.
7)Raw Material
As we know, the quality of forged grinding piece depends on the material by 80%. Our products use high-quality round steel from national large-scale steel mill to insure the quality of our products.
Sprcification:
| Material | C | Mn | Si | Cr | S | P |
| 45# | 0.42-0.50 | 0.50-0.80 | 0.17-0.37 | ≤0.25 | ≤0.025 | ≤0.025 |
| 60Mn | 0.57-0.65 | 0.70-1.0 | 0.17-0.37 | ≤0.25 | ≤0.025 | ≤0.025 |
| 65Mn | 0.62-0.70 | 0.90-1.20 | 0.17-0.37 | ≤0.25 | ≤0.035 | ≤0.035 |
| 40Cr | 0.37-0.44 | 0.50-0.80 | 0.17-0.37 | 0.80-1.10 | ≤0.035 | ≤0.035 |
| Ball diameter | Diameter tolerance | Weight of single ball in average | Number of piece of one ton ball in average | Surface hardness | Core hardness | Impact toughness |
| (mm) | (mm) | (g) | (pcs) | (HRC) | (HRC) | (J/cm2) |
| Φ20 | +2,-1 | 32 | 31250 | 60-67 | 57-62 | ≥12 |
You Might Also Like |
