Small 500A Diesel Welder Generator For Industrial / Construction

Small 500A Diesel Welder Generator For Industrial / Construction

Multifunctional DC Welding Generator Specifications:

1. Using the high qualtiy low speed diesel engine: can be used for high altitude, low ambient temperature. Supply various brand diesel engine for choice, like Changchai, Fawde, Perkins, Deutz, Cummins and other chinese or international famous brand diesel engine.

2. The Welding use the intelligent technologies: with Manual Arc Welding (MMA), Gas Metal Arc Welding(GMAW) and Argon Arc Welding (TIG), can meet for various kinds welding processes.

3. Adopting the advanced full bridge phase shift resonance oscillation soft switch DC/AC convert, dynamic characteristics of fast response, good welding performance.

4. Dual welding output design: one welding generator set has double welding torch can be welded independence (For model ADC700 and ADC1000).

5. Welding over heat and over current protection: when over current or over heat, the welding will be protected to avoid the damaged of equipmenmt.

Multifunctional DC Welding Generator Function:

1. Voltmeter and ammeter:

CV mode: the voltmeter display the setting welding voltage, ammeter display the speed of setting amount(0%-100%) of wire feeder, when you are not welding; display the actual output voltage and current, when you are welding.

CC mode: the voltmeter display actual output voltage; the ammeter display welding setting amount, when the welding is no load, display the actual current, then welding.

2. Welding mode choice:

CV--Constant voltage mode: there are GMAW mode and GMAW locking mode, suitable for MIG and MAG welding processes.
GMAW--None-locking GMAW: press the switch of welding torch to start welding, lossen the switch of welding torch to stop welding.
GMAW locking--Locking GMAW: press the switch of welding torch to start welding, it will continue welding, when you lossen the switch, and press again the switch to end mode, lossen the switch to stop welding.
CC--Constant current mode
MMA--Stick
TIG--Simple DC TIG: Touch or scratch ARC.