Plastic Food Container Forming Machine

1. Introduction

DB-520B is developed by our research and development personnel according to the demand of packing market. In combination with the advantages of aluminum-plastic blister packing machine and plastic sucking forming machine, this machine is a new type product developed in light of pharmaceutical standard GMP and food standard QS. This machine adopts a fully automatic flow covering blow molding or plastic suction molding, punching and diet cutting as the special properties of products required by the users. It is with advanced technology, safe and simple operation, which will avoid the consumption of labor on the manual punching and contamination from the touch with the employee. Therefore, the quality requirement is secured during the production. Aligned heating is employed by the equipment, and it enjoys low power consumption, small covering of land. It is applicable to the plastic ware such as PP, PVC, PET, PS medicine trays, and cup lids, thermoforming boxes.

2. Performance features

1. Speed reducer, main-rotating connection, main shaft are on line (to decrease driving error) for mechanical transmission.

2. Sensor controls are adopted in pneumatic system .PLC control makes the whole machine run smoothly, keeps synchronous stability during the products are to be packed in multi-labor, long- distance . 

3. Main motor non-stop speed regulating, the travel adjustable at will, simple and convenient to change the mold, manipulator traction, stable running.

4. Positive pressure formation in the equipment. (Puffing forming) 

3. Main technical parameters

Model                                                    DB-520B-2

Punch Frequency                                 15-35punch/min

Material                                              PP, PS, PET, PVC, EPS, etc.

Material thickness                                    0.1mm-1.5mm

Max. Forming Length                                 320mm 

Max. Forming Width                                    520mm 

Max. Forming depth                                     70mm

Upper and Lower Forming Power               22KW

Motor Power                                                6KW

Total Power                                       3-phase 4-wire 380V 50Hz (220V 60Hz) 22kw

Water Consumption                           0.3m³/h (Tap water or recycle water)

Air Pressure                                          0.5-0.8(mpa)

Exhaust Volume                                    ≥0.8 m³/min

Pressure of water supply                         0.2MPa

Machine overall size(L×W×H)           6000×1800×2100mm

Packing Size(L×W×H)                       6200×2000×2300mm

The maximum width of material             550mm

Weight                                                  5000KG

Samples

factory engineer 

Shipment 

 CERTIFICATE