Diameter 38mm punched spiral welded pipe Filter punched spiral tube skeleton Center tube

A spiral tube, also called a spiral steel tube or a spiral welded tube, is a method in which a low carbon structural steel or a low alloy structural steel strip is rolled into a tube blank at a certain angle of a helix (called a forming angle), and then the tube seam is welded. It can produce large diameter steel pipes with narrow strips.

The spiral pipe is mainly used for the pipeline of oil and natural gas, and its specifications are expressed by the outer diameter * wall thickness. The spiral pipe has single-sided welding and double-sided welding. The welded pipe shall ensure that the hydraulic pressure test, the tensile strength and the cold bending performance of the weld are in compliance with the regulations.

Spiral submerged arc welded pipe for pressure fluid transportation is mainly used for conveying oil and natural gas pipelines. The steel pipe has strong pressure bearing capacity and good plasticity, which is convenient for welding and processing. Generally, spiral submerged arc welded steel pipe for low pressure fluid transportation adopts double-sided automatic Submerged arc welded steel pipe for general low-pressure fluid transportation such as water, gas, air and steam made by submerged arc welding or single-sided welding.

Characteristics

Features of spiral tube: Straight seam welded pipe has simple production process, high production efficiency, low cost and rapid development. The strength of the spiral welded pipe is generally higher than that of the straight welded pipe. It is possible to produce a welded pipe with a larger diameter by using a narrow blank, and it is also possible to produce a welded pipe having a different pipe diameter with a blank of the same width. However, compared with the straight pipe of the same length, the weld length is increased by 30 to 100%, and the production speed is low. Therefore, most of the smaller diameter welded pipes are straight seam welded, and the large diameter welded pipes are mostly spiral welded.

use

Spiral tubes are mainly used in water supply engineering, petrochemical industry, chemical industry, electric power industry, agricultural irrigation, urban construction, and are one of the 20 key products developed in China. For liquid transportation: water supply, drainage, sewage treatment engineering, mud transportation, marine water transportation. For gas transportation: gas, steam, liquefied petroleum gas. For structural use: for piling pipes, for bridges; for piers, roads, building structures, marine piling pipes, etc.