Tire Shredder Tyre Crushing Machine Recycled Scrap Tires With Harden Gears
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Nanjing, Jiangsu, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | ZPS-900 |
|---|
Product Description
Tire Shredder Tyre Crushing Machine Recycled Scrap Tires With Harden Gears
Specifications
Tire Shredder ( Shredding whole tire into block 50x50 mm)
1. High Quality
2. Good Service
3. High Capacity
4. CE SGS ISO
This machine for cutting whole tire to 50*50mm rubber block.
This machine has the compact structure, advanced technology, low power consumption, high
eficiency, crushing room with folio structure, easy to maintain, etc. The machine adopts hard
alloy steel as its blade, high rigidity and wearble, repeating and wearable, repeating repair use
polong use life. Circle mesh screenis steel gridding structure, big area for material dropping is
good for production of eligible rubber materail. The oversize types should be cutted before
crushing.
Characteristic
1. The shredding chamber adopts folio compact structure for easy maintenance, compact
structure;
2. The shredding blade edges are made of hard alloy after subsequent high hardness, high
wear special processing. In a short time,rapid replacement of wearing parts of the cutter solves
the problem of hard replacement, difficult to repair and high cost.Long service life, high efficiency,
advanced technology and convenient replacement,etc;
3. The machine adopts high efficiency,low noise,steady and high torque planet-gear speed
reducer,easy operation and safe;
4. The circular screen is the structure of wire mesh,large blanking area and conducive to the
eligible grading rubber block, avoiding the qualified rubber block repeated crush in the crushing
cavity and reducing yield. Low energy consumption, advanced technology and high efficiency;
5. For oversize tyres also can achieve the ideal crushing effect after segmentation.
|
Data/model |
ZPS-900 |
ZPS-1200 |
|
Number of knives |
16 |
20 |
|
Size of the knives(diameter)(mm) |
356 |
510 |
|
Productivity |
800-1500kg/h |
1000-3000kg/h |
|
Feeding |
Below 900 whole tires and various of tire tread (remove the steel bead ring of tire) |
Below 1200 whole tires and various of tire tread ( remove the steel bead ring of tire) |
|
Discharging (mm) |
50mm strip block and 50x50mm crumb |
50mm strip block and 50x50mm crumb |
|
Main motor power(kw) |
22*2=44kw |
55*2=110kw |
| Input size | less than 900 | less than 1200 |
| Discharge size | 50-300mm | 50-300mm |
| Screen power | 1.5kw | 5.5kw |
| Main shaft speed | 19rpm | 22rpm |
| Screen speed | 14rpm | 25rpm |
FAQ
The brief description of tire processing:
1. First, we need to cut and draw out the bead wire of the tire by the Compound Tire Cutter
and Extractor,
2. Then we can put the tire into the Tire Crusher by the conveyor, the tire will be crushed
into small pieces with the size of 50x50mm.
3. And those small pieces will be conveyed to the Secondary Crusher to be crushed into
small particles of 6-12mm.
4. Now we need a Magnetic Separator to separate the steel fiber from the rubber particles,
and a Square Magnetic Vibrator to separate the coarse fiber from the rubber particles by
vibrating.
5. The coarse fiber will be collected in a box and the rubber particles will be delivered to a
third Rubber Shredder to be shredded smaller of 1-4mm.