Horizontal Steel Wire Drawer Die Drawing Process Double Hook 15 Kw

Horizontal Steel Wire Drawer Die Drawing Process Double Hook 15 Kw

Specifications

Draw out the steel wires from the tire.

Application:

Draw out the steel wires from the tire bead.

Structural Features:

This machine consist of motor ,hydraulic system,drawing hook, drawingmouth,and main part,etc.

its basic principle is Drien hydraulic system and made the cylinder work by the motor to make the drawing hook liked the cylinder spull pople reciprocate motion.put the tire on the drawingmonth

and jut the drawing mouth to hook steel wire. meanwhile the rubber part of tire is teared because

of the drawing mouth blick it. thus get the effect of separating smoothly.

Technical parameter:

1. Power:11Kw.

2. Cylinder moving:1200mm.

3. Tyre size:≤1200mm diameter.

4. Pull:13Tons.

5. Capacity: about 1000Kg/H.

6. Overall size: 3150*760*1120mm.

7. Weight:1200Kg.

Technical data:

1. Usage: drawing the wire from tyre

2. Tire specification: 1200-4000mm

3. Capacity: 20-50 tyres/hr

the line is complete automatic line, from drawing out the steel circle from the tire bead,

crushing the whole tyre, separating the thin steel and fiber to the rubber powder,

The line is recycling the waste tyre under the normal temperature.

Feature of tire wire drawing machine

1. it is used to crush the waste tires into rubber powder
2. it is good for environmental protection and energy saving, Market Prospect Broadness .

3. it can get iron/steel removing ratio>99.5%, fiber removing ratio>98%.

Hydraulic waste tire recycling equipment Single Hook Tyre Debeader

Flow working chart of tire wire drawing machine

waste tire---wire drawing ---whole tire cutter---rough crusher---rubber grinder----

magnetic separating and fiber separator---pulverizer unit---rubber powder

Rubber powder application