Standard Size Amorphous Silicon Thin Film Solar Panels For Roof Power Station

Place of Origin:	Zhejiang

Company Profile

Hangzhou Amplesun Solar Technology Co., Ltd.

Location:	Hangzhou, Zhejiang, China (Mainland)
Business Type:	Manufacturer

Product Detail

Model No.:	ASF110

Product Description

Standard Size Amorphous Silicon Thin Film Solar Panels For Roof Power Station

Advantages of thin film solar panels:

1. Less power loss under the same shelter area

2. Less power loss under the same irradiation than crystalline silicon solar cells

3. Better power temperature coefficient

4. Better optical transmission

5. Better power generation under low-light conditions

6. Thin thickness, 1/200 of crystalline silicon cells, only a small amount of silicon is needed.

7. No internal short circuit (build-in on-line has been built in the manufacturing of series cells)

8. Abundant material supply

9. Integrate with the buildings (BIPV)

low-cost with good quality;
independently designed and developed
Popular in Europe&America
lower price solar power system

quality solar panel power with CE,ISO

Advantages of BIPV Module

1. Solar power generation, supplying clean energy for buildings.

2. Approved by national PV & Building industry, energy saving certificate, reliable quality.

3. Noise resistance, heat resistance and strike resistance. Full compliance with criteria of energy-saving building materials.

4. Save land resources, replace traditional building material, lower system cost.

5. Intelligentized and personalized, regulating light and temperature, saving energy and protecting environment.

6. Various color and transparent ratio. New aesthetics decoration element for modern building.

SPEC :

thin film Solar Panel 100W
Maximum power(Pmax): 100 W
Material: amorphous silicone cells
Open circuit voltage (Voc): 110.50 V
Short-circuit current ( Isc): 1.65 A
Maximum voltage (Vmp): 99.40 V
Maximum current (Imp): 1.29 A
Size of Module (mm): 1414*1114*7 mm ( unframed) or 35mm ( framed)
Weight Per piece (KG): 20.3 Kg

Why choose thin film solar panels

Crystalline silicon photovoltaic modules lose some power-generating capability with rises in temperatures.
But thin film silicon photovoltaic modules generate higher power during summer time.
Thin film silicon photovoltaic modules can deliver maximum performance during summer when the electricity is needed most for air-conditioners in houses and offices due to following characteristic.

Low temperature coefficient:

Normally, the electricity performance of photovoltaic module is measured by STC standard. Which include strong sunlight(1000 W sunlight per square meter,1.5 A solar spectrum distributing) and 25°c solar cell temperature. However, the temperature of solar module, operating in the sun, can be higher than atmosphere temperature 28°c. The temperature of solar module, which installed at the roof of building, can be even higher. It is not unusual for the temperature of solar module to achieve 55°c.

In this case, the temperature coefficient is a very important parameter due to various solar cell technology.
The temperature coefficient is always minus. With the temperature increase, module power will decrease accordingly. Temperature coefficient for thin film silicon solar cell is -0.2%/°c, and that of crystalline solar cell is -0.5%/°c. That means, when the module is worked on 50°c condition, compare to the efficiency reached on 25°c test standard , thin film silicon solar module will loose around 5%, and the loss for crystalline will be around 12.5%. In conclusion, even the STC efficiency of thin film silicon solar cell is low, the efficiency in actual operation condition is not far away to that of crystalline solar cell.

Post Buying Request

Contact Supplier