XKDL-3000A Intelligent Measuring Sulfur Analyzer

Sulphur Analyzer

Product Name: Intelligent measuring sulfur analyzer

Product Type: XKDL-3000A

Scope:

XKDL-3000A intelligent sulfur analyzer. which is mainly used for determination of total sulfur in coal. coke. iron and steel and various minerals. For laboratory coal. electricity. metallurgy and geological prospecting and other departments to use. The instrument is measured according to national standard GB / T214-2007 coulometric titration. All measurement process using microcomputer control. digital display the percentage of sulfur in coal and total sulfur in milligrams. while print measurement results. The instrument has a simple operation. high degree of automation. integrated design. reasonable structure and so on.

Features:

1.One fixed sulfur analyzer. test the whole process by the MCU control. high degree of automation;

2.Unique data acquisition network and multi-level correction technology to ensure the accuracy of the measurement results;

3.Measurement speed. automatic endpoint determination test and print test results;

4.Type PID temperature control algorithm uses expert overshoot smaller. more accurate temperature control; original stirred steady speed and balance system to ensure long-term stability at the same speed setting; with sub-type heating algorithm to extend silicon carbon tubes life.

5.Platinum and rhodium - platinum thermocouple.

6.Built-in fault display. with power protection.

7.This instrument uses high-temperature tube furnace combustion furnace. double thread silicon wire heating element is at one end of the carbon tube. To increase its insulation properties. silicon carbon tubes jacket corundum protective tube. then fill the high alumina and aluminum silicate cotton insulation to achieve good insulation. burner tubes made of corundum tube. can be placed directly into the silicon carbide tube.

8.Electrolytic cell using a platinum electrode sheet 99.9999% of platinum. the cell pole pieces connected to the platinum film.

Technical parameters:

Sulfur measurement range: 0.01 to 20%;

Sulphur Resolution: 0.01%;

Test temperature: 1150 ℃;

Heating rate: 1150 ℃<30min;

Output Power: ≤4kw;

Single-sample test time: about 5 minutes;

Temperature accuracy: ± 3 ℃;

Power supply voltage: AC220 (1 ± 10%) V. 50Hz;

Dimensions (mm): 710 × 500 × 390;